Household is decorated in the ceramic tile with seam jointing good or beautiful?

As we all know, laying floor tile is pointing to, and some owners think jointing agent to decorate the effect is not beautiful seam an agent with good effect, but the price of the seam an agent is a relatively expensive, the floor tile seam jointing good or beautiful?

jointing agent is what?

jointing agent also known as gap filling agent, the main ingredient from predominantly white cement in polymer and trace agent, etc, are mainly used in ceramic tile aperture, prevent ceramic tile aperture black dirty, have very strong fouling resistance compared to easy to clean.

what is the seam an agent?

the seam an agent is made from polymer, is the promotion of jointing agent, water has the same mouldproof function, is suitable for ceramic tile, stone material and vitreous brick veneer material to fill the gap.

jointing agent and the seam an agent have what differentiation?

beauty into glaze ceramic tile seam an agent is curing the future appearance, oil anti-fouling ability strong contrast, convenient cleaning; Jointing agent need to use professional cleaner to deal with. The problem is that most many owners care the difference between our price, the seam an agent quotation slightly higher than ordinary caulking agent; A brief comparison of cheap jointing agent cost, construction.

seam construction matters needing attention in the United States:

1 hit 40 cm long before, construction glue need not, in order to prevent the front rubber mixing unevenly, cause don't harden completely after construction.

2, in the process of construction, such as more than 15 minutes without continuous glue, colloid are already in the mixed tube curing, the need to hold in glue. More than available time ( About 20 minutes) Later, in the static gel is not easy to squeeze tube, such as extrusion force likely to cause damage, glue gun if you want to continue to use, you need to change the new static mixing tube. Have inside the hose is not finished with glue, but along with static mixing tube has been gradually solidified preservation, for the next to be unavailable, change new static mixing tube again can continue to use.

3, such as construction, where temperature below 15 ℃ high viscosity should not play with glue gun, at this time but will immerse in hot water for 10 - king of true porcelain 20 minutes or 10 minutes with blower and glue.

4, colloid removal method: after curing can use hot water or hair dryer by heating it with a knife.

through the above introduction of jointing agent there were simple and beautiful seam an agent, if the family conditions allow, small make up recommend limited still choose beautiful seam an agent cost performance is better. If you still have what not understand of place, can log on to our website for more online directly. Our online customer service will be 24 hours of aggravation for you!