How big is the gap in the construction of the beauty joint agent? What kind of beautification agent is good to choose-beauty beautification agent factory

How big is the gap in the construction of the beauty joint agent? What kind of seam agent is good to choose?

The problems involved in the beautiful seam of ceramic tiles are mainly concentrated in two aspects: one is the problem of the size of the seam, and the second is the problem of the beautiful seam. The following two aspects will introduce the problem of crack treatment in the decoration construction of ceramic tiles.

One, beautiful sewing

The materials selected for the beauty seam are mainly: beauty seam agent, two-component beauty seam agent, one-component beauty seam agent, real porcelain king, porcelain leveling beauty seam agent, etc...

There are two ways to choose the color of the beauty joint agent. One is the approach method, which is to choose the beauty joint agent that is similar to the tile color, and the second is the contrast method, where the color and the tile color form a strong contrast.

Generally, the time used for jointing is after tiles have been affixed for hours, that is, after the tiles are dry, if the jointing time is too early, it will affect the tiles to be affixed, causing unevenness or looseness. In addition, before the jointing, the dirt and debris in the cracks of the tiles need to be cleaned up.

Two, leave the seam

Since the seamless brick is straight cut or trimmed, the brick surface and the side surface are at a right angle, so when the two pieces are joined together, the gap between the brick and the brick is very small, so the gap is very small. , The integrity is stronger, so some friends who are in pursuit of effects let the workers do seamless paving. This approach not only fails to achieve good results, it is also a very wrong approach.

. Antique tiles generally have a slightly wider seam, usually -mm.

. The culture bricks on the outer wall of the balcony are generally left with a seam of about mm.

When paving seamless tiles and other wall tiles and polished tiles, the size of the seam should generally be around —.㎜, not less than ㎜. Air nails can be used as a reference.