How can the seam an agent erase?

If not carefully in the process of construction of the stick to the hands or other things, can directly with a wet rag wipe up, is important to note that to erase, do not hesitate to wait. Because of the seam an agent curing particularly fast, basically can be set in a few minutes. After solidification of the seam an agent it is relatively difficult to clean. If we after arrival in construction, some places because of breach, the seam an agent has curing affect beautiful, or dissatisfied with the before the construction of the intent to be construction should be how to solve?

the seam an agent how can erase the

use the tools and materials: a heat gun brought, wire strip a, wallpaper knife, clean white towel in two pieces, a bottle of anhydrous ethanol

steps:

1, first with a towel over the footprints part of

2, clean a towel of the flat out at the site of the beauty footprints seam an agent pollution

3, open the bottle of anhydrous ethanol, pour it on the towel, towel soaked subject

4, applying heat gun with electricity, turn on the switch, switch to a second gear. Heat gun outlet is the towel and move back and forth, about a minute after heating, with a heat gun flat mouth parts on the towel, forcibly moved back and forth, until the stains

5, small residual points available fingers with towel scrub, dot to remove 6, until the final with a wet towel to wipe the

note:

1, the heat gun heated outlet is very hot, to avoid scald

2, heat gun and towel together of the time not too long, towel dry up the anhydrous ethanol in time

3, don't too hard, or use the blade row

clean beautiful seam an agent slit strip method:

the preparation of the instruments: professional heat fan, pen knife, crack-cleaning cone.

steps:

1, with professional heat fan heating ceramic tile aperture, do not recommend the use of common household hair dryer, temperature can not reach, and long time heating will damage the hair dryer. Professional hot air temperature of air can reach 400 degrees, please wear gloves to prevent burns.

2, use ceramic tile along the edges, knife edge heating, forcibly cut the seam an agent, cutting, pay attention to safety. Some parts can be used with the crack-cleaning cone together, beautiful seam an agent is easy to remove.

note:

1, the cleaning process do not covet convenient use of acidic or alkaline cleaning fluid, so as not to damage the ceramic tile.

2, use a sharp instrument, high temperature, such as tools, cleaning process accompanied by flying dust crumbs, etc. , please do protective measures.

the defiled with seam an agent on the skin or the clothes of the solution:

1, if is to stick to the skin, best can use clear water soak for a period of time, first in our family the wash detergent, wash after have a look, if there is some residual beautiful seam an agent at this time, we can use inside the home use of salt, it is good to wash again!

2, if not careful when construction will got clothes on the seam an agent, forcibly knead affirmation is a must, but before rubbing, you can soak in salt water for a while first, when rubbing to add a little vinegar, this allows the residue in the wash clothes on the seam an agent,

3, if the skin, and it is hard to wash clothes, also can use alcohol to clean, alcohol has a strong solubility, can dissolve in most organic matter ( The seam an agent belongs to organic matter) To evaporate.

4, there is a kind of way is you can try to poison, dissipation but use disinfection is easy to make clothes rub off!

small make up recommend dear friends buy the seam an agent construction, pick some old clothes for the damaged not love dearly, construction when we watch video smoothing out first step. When construction carried out in accordance with the construction step by step a little bit gradually, as far as possible to reduce the likelihood of the accident. In addition, if not sure about the diy ability, Suggestions, please professional construction team to help you complete the construction effect is better.