Professional manufacturer of tile grout and adhesives with 27 years experience

How deep the seam? How deep is appropriate

2020-12-07

Kastar

163

Different types of ceramic tile, their thickness is different also, some ceramic tile is thick and some thin ceramic tile, it also determines the shades of ceramic tile aperture. Ceramic tile bottom mud with water or adhesive stick up, but will not change the depth of the crack, crack too deep can make beautiful stitch, best how to do?

do you want to be beautiful ceramic tile seam, to crack the depth and width of the has certain requirements, width should be 1. More than 5 mm, depth to want to have more than 3 mm, if ceramic tile aperture depth greater than 3 mm, there are three kinds of construction methods, see if you prefer.

1. Do caulking redo stitched

the gap is too deep, can choose to do caulking, caulking agent can fill the gap depth, provide the bottom of the flat, convenient and subsequent do beautiful seam, also can save the cost, otherwise all use the seam an agent, dosage is very large, the cost is rising. It is free to control the depth of the crack, can follow-up to clean again.

2. Construction do beauty directly seam

if you don't care of the cost of the owner, can do it directly on the seam, let beauty seam an agent to fill in the gap, don't worry about the depth of the crack, the seam an agent stronger adhesion, but need the beauty of the seam an agent dosage is very big, cost is higher, and at the bottom of the aperture should clean up, otherwise it is easy to appear not stem.

3. Choose epoxy sand texture beauty seam an agent

in order to facilitate the construction steps, save us the cost of a seam epoxy sand texture beauty seam an agent can be selected for the construction, the construction method of this product and caulking agent as simple, and can fully contact on both sides of the aperture, the price is lower, also on the depth of cracks without too many requirements.

, before we do the seam must be reserved in advance the width of the gap, because of the gap is too deep we can later caulking, the gap is too shallow, can be cleaned up, only the width of the cracks cannot be changed. If gap about 1 mm, cleaning up easily scratch ceramic tile profile, width does not change much, so at the time of ceramic tile is deciding to do beautiful seam, reserve in advance good gap width.