How do caulking construction agent? The method is very simple, but be careful not to make mistakes

Caulking, a lot of people want to do now but expensive construction has made many people stop, caulking actually can do it yourself, the construction method is simple, mainly divided into crack-cleaning, glue, seam pressure, plastic shovel the four steps, but before that, we need to take a look at, these steps should be how to operate it.

gap filling one of the most important steps, and the first step is to clear seam, gap should be removed first, behind such steps can run smoothly. Step by step, and then in sequence to gap filling well, look at these steps are how to operate.

a, clear aperture

clear aperture is has the certain difficulty, if you have implants inside, can use the crack-cleaning cone, reoccupy cleaner brush or out dust. But if inside filled in the cement, need to ask professional personage to clean up, so as to avoid broken tiles. Crack-cleaning gap on both sides must clean up, and to set aside more than 1 mm width, the depth of about 3 mm. Gap to keep dry, as a result, gap is clear.

2, glue

the caulking Kastar grout is installed on the glue guns, uniform of the mobile position, let the caulking agent evenly into the gap, gap there is enough of the colloid. before use, to the front of 40 cm off without glue, these without mixing colloid not curing, not use inside the gap. And meet the ceramic tile of rough surface, also labeled for crepe paper glue in advance, otherwise caulking gun on the ceramic tile is hard to clean up.

3, seam pressure

seam pressure shall be carried out after the glue, set aside a little time for caulking gun to precipitate into the gap of the seam pressure can also avoid the pressure when take away a lot of colloid. And seam pressure need to use the same kind of tools, to avoid a gap to use several tools, the magnitude of the seam pressure to be consistent, in this way can of the pressure level off is smooth.

4, plastic shovel

if the glue was used in a different way, shovel glue differently. Shovel glue has two methods, one kind is with the ceramic tile of crepe paper, 15 minutes after the seam pressure will tear, crepe paper, don't wait for caulking curing Kastar grout. One is smooth on the surface of ceramic tile, need to wait for caulking agent curing totally shovel glue. Scooping up with a shovel knife gap filling agent, hard caulking Kastar grout can directly with the hand torn off.

Kastar Adhesive Co.,Ltd. continued to crave a more intense, personalized workout experience.

Kastar Adhesive Co.,Ltd. attaches great importance to customers and assists them in achieving their demands.

Kastar Adhesive Co.,Ltd. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.

According to the market analysts, exports from Kastar Adhesive Co.,Ltd. facilities in China will exceed the forecast.