How do the old ceramic tile seam a slit, the effect is better than new also

Beauty in many people's view, ceramic tile seam is decorated in the bridal chamber, only when such a new look more bright beautiful, also can always protect the use of ceramic tile. In fact when doing the seam is not limited to, also not to do only, bridal chamber is decorated, can also do the old house of old ceramic tile seam, as good effect. So do you want to be the old ceramic tile seam, need to pay attention to what aspects?

how do the old ceramic tile seam a slotted

1. Gap too dirty

the old and new ceramic tile ceramic tile is different is that the old tile use longer and crack in the accumulated a lot of dust, if want to do the seam, ceramic tile aperture must seriously be removed. And some ceramic tile aperture size is differ, the inside is filled with cement, needed a professional grinding machine, cement out from the gap, can clear the width.

​2. Wear much

the old ceramic tile ceramic tile surface after long use, badly damaged on surface, some ceramic tile glaze has even been badly scratched. Like this kind of old ceramic tile, even if the surface is smooth, when doing the beautiful seam are labeled as crepe paper, wipe on the seam wax, avoid the seam an agent on the ceramic tile clean out.

​3. Ceramic tile is at the bottom of the damp

the elder to use ceramic tile, natural causes and think that the reason, will lead to the bottom of the ceramic tile is damper, want to do the seam, ceramic tile aperture must be kept dry. Want to know whether or not his ceramic tile aperture, damp can into a tissue in the gap, such as pick out again after 24 hours. If gap damp paper towel is a little soft collapse, all, need to do the gap drying and beautiful seam. If there is no change, explain aperture is not wet, can directly do the seam.

​4. Ceramic tile whether loose

ceramic tile use time is too long, at the bottom of the slurry shrinkage, loose tile appear empty drum, is very normal things, in this case do the seam must not be directly. Although the seam stability of ceramic tile, prevent loose, but do the seam in loose when ceramic tile, affect the seam an agent and the curing effect of adhesion. Loose tiles must hold again to do it again, this is the best effect.

secondary beautiful seam

1, qing joints with crack-cleaning clean ceramic tile aperture cone of sawdust, dross etc. , if after cleaning floor tile aperture is empty, need firstly, backing with gap filling agent, and then set aside 1. The aperture of 5 mm depth.

2. Stickers along the edge of ceramic tile aperture horizontal flat vertical stick good crepe paper, stickers, sew paper and tile edges overlap as far as possible, don't more than ceramic tile edge to sew, so when the time comes to tear the paper will have holes.

3, caulking

the hose inserted in the seam an agent, it again is installed in the glue guns, along the seam an agent directly to squeeze into, the key is to pay attention to strength. Fill the gap, while the seam an agent can also flow, with scraper or ice cream sticks (leveling Note: don't wait for the entire surface is fill out shave)

4, tear paper torn off in time when it is important to note, crepe paper for preparation and rapid solidification, crepe paper tore off not in time will result in two situations: either can't tear off entirely, crepe paper edge of ceramic tile aperture is coarse; Or had dried preparations were textured paper tape, needs to be filled.