How do the seam an agent off ( It's too hard to do? ）

A two-component beautiful seam an agent compared with traditional gap filling agent, hardness is better, not only smooth wear-resisting, and adhesion strong, is to fill the gaps of the preferred products. But when doing the beautiful seam will meet different problems, the owner reflects his shovel construction glue, the seam an agent is too stiff to shovel off, this is how to return a responsibility?

the seam an agent to shovel out why

the seam an agent construction the final step is to shovel glue, need to wait for the smooth surface of the ceramic tile seam agent completely after curing. Shovel glue when gently with the shovel scooping up a beautiful seam an agent, can follow behind the tear, is very easy, but if you meet the following several kinds of cases, the seam an agent becomes hard when dry, not to drop.

1. The quality of the product is bad, the seam an agent does not pass, although hard when dry, but also very brittle, beautiful seam an agent is not coherent, scooped up very troublesome, is also very difficult, or even to shovel out;

2. Residue on the surface of the ceramic tile of colloid is too little, only a thin layer attached on the ceramic tile, even if the solidification is also difficult to shovel off;

3. Ceramic tile surface rough, not smooth glaze, glue not stick, crepe paper before didn't wipe the seam wax, lead to the seam an agent fully adhere on the ceramic tile, there's no way to shovel;

4. Shovel gel time interval for a long time, the seam an agent curing time is too long, has been very hard, and strong adhesion, scooped up very laborious, some even shovel out.

how beautiful seam an agent out

1. Buy quality pass the seam an agent, water-based beauty hard resilient seam an agent, shovel glue will be more convenient; The epoxy color sand construction or purchase, do not need to shovel glue;

2. Right amount of sealant, let colloid fill the gap, pressure seam surface colloid don't remain too little, want to crack in the broken links on the seam an agent and ceramic tile, this can convenient shovel glue;

3. Rough surface of the ceramic tile with wax or crepe paper, avoid the seam an agent direct contact with the ceramic tile, after curing can't shovel glue; In the seam pressure crepe paper torn off in 15 minutes;

4. Beauty on the surface of the seam an agent is too hard, you can use the hot air blower to blow softer, with the shovel shovel, a small amount can't remove the seam available detergent to wash clean.

construction problems, don't be panic, all sorts of problems can find a solution. As long as according to the specifications of the steps to do it, pay attention to each note, believe that everyone can do well the beauty of the seam.