How long will the seam an agent general shovel?

The seam an agent is generally how long the shovel

how long the smooth surface of ceramic tile shovel glue on the smooth ceramic tile, can directly use the seam an agent, to the seam an agent into the gap, half an hour can use a pressure seam to seam pressure the ball. Waiting for 48 to 72 hours, the seam an agent completely after curing, you can use the plastic shovel will be redundant beauty on the surface of the ceramic tile seam an agent shoveled away, because has cured, the seam an agent is very hard, so can one-time shovel clean. If there is no completely curing the seam an agent, shovel glue, tile will have certain colloid, processing up more troublesome.

posted also crepe paper glue with a shovel?

whether the ceramic tile of rough surface, or a corner of the room, can be labeled as to help construction crepe paper in advance. After labeled as crepe paper, can guarantee the redundant beautiful seam an agent does not get on ceramic tile, can also be convenient to clean up. After finished plastic, pressure of 30 minutes, it can be beautiful seam an agent torn off. The longer the interval of time, the seam an agent, the greater the degree of curing and crepe paper also the more difficult it will be pulled off. So as the construction of crepe paper, must tear in a short time.

how long the ceramic tile of wax scraper glue

the seam wax is suitable for the rough surface of ceramic tile, like archaize brick, wood flooring materials, on either side of the ceramic tile aperture wiped gently again, don't rub into the gap, and then you can directly into the seam an agent. The seam wax can isolate the seam an agent and ceramic tile, seam an agent in the United States after curing, completely can the beauty of excess seam an agent directly off, sometimes it can be torn off by hand. Beautiful seam wax don't need too much, but too few cannot isolate, beautiful stitch wax operation much more simple than crepe paper and requires no additional cleaning.

whether smooth ceramic tile, ceramic tile or rough, shovel glue needs to be set according to the temperature at which the construction. Construction temperature is 5 ℃ - general 35 ℃, the temperature is lower, the seam an agent curing time is longer. Need to extend the seam an agent processing times. And the higher the temperature, the seam an agent curing time is short, can be off as soon as possible.