How old epoxy floor paint to clear?

How old epoxy floor paint to clear?

no matter how good epoxy floor quality is done, the service life of it is limited. On the normal concrete made of epoxy floor, 5 - Eight years, even without the shell epoxy coating, but because of the frequent use of the ground, epoxy floor surface will also be scratching, fade phenomenon. If old epoxy floor paint is peeling, bad situation, before the construction of new epoxy floor paint, old paint layer need to be removed, the remove damaged epoxy paint process, we call in addition to paint.

in addition to the paint, to see whether the old floor. If epoxy floor is small area damaged, only need to remove partial damage of coating, coating, keep intact with same color epoxy resin material for repairing; If floor area appeared peeling, blister, corrosion, cracking and other serious circumstances, you may need to remove the whole floor coating on the surface of the whole, until the base material, the appropriate floor again.

common to several in addition to the paint method is as follows:

,

paint removal method paint removal refers to the use of certain construction machine to divide lacquer art, such as manual grinding, shot blasting, high pressure, Abrasive) Methods of jet, can be effective to remove the old floor lacquer layer.

2, flame in addition to

if the old floor lacquer paint method compared with glue at the grass-roots level and firm, can use flame of floor heating, make the old paint layer of soft, sparkling, reoccupy scraper will old floor lacquer layer. This method is called flame method in addition to paint.

3, lye finishes

lye paint removal method is the use of alkali corrosion effect, make old soft film, so as to achieve the aim of removing the old floor paint film.

4,

paint remover to take off the paint coating paint remover can dissolve or swelling, is zoned or paste, mainly by the dissolving ability of solvent and paraffin wax, cellulose, etc. In the floor coating industry, the main mechanical methods to remove old coating are manually roast shovel, shot blasting, etc.

this article by the WWW. paintmt。 Com provides, if want to know more information, please continue to pay attention!