How soon can finish shop floor seam ( Four attention! ）

Spread the floor tile of 24 hours is not to do the seam, the seam an agent in 1 - shop sticks ceramic tile Three days later. Under normal circumstances, the sunny weather after ceramic tile stick good, must wait until dry ceramic tile aperture thoroughly on the seam, usually need to wait about two or three days. If you meet after rainy day, may be a longer waiting time, the following beautiful seam an agent factory beautiful seam an agent to concrete is introduced.

a, ceramic tile stick good after 2 weeks usually need to use

shop sticks ceramic tile grout, such as cement dry after ceramic tile to be fixed. Just stick ceramic tile is very damp, but because the environment is not suitable for the seam, to dry thoroughly to the United States such as ceramic tile seam. Generally need to wait about two weeks, if there are any rainy day, waiting time may be longer. Dry the ceramic tile is the most suitable for the seam, the gap is very dry, and there is no impurity and dust, eliminating the crack-cleaning steps, can the seam an agent and ceramic tile firmly stick together.

2

before, installation ambry kitchen and toilet need to install a lot of ambry, the owner want to do the seam in metope and ground, must be done before installing the cabinets. Because ambry can pin ceramic tile, do the seam, the space is narrow, limited construction, make the sewing effect is not perfect, also some places cannot do it. This will affect the whole beautiful, can also affect the use. So, before installing the ambry, remember to do the seam.

three, move furniture before some people move furniture into the house, to remember to do the seam, so need to move again to furniture completes the seam, or is blocked by furniture place will not be able to do the seam. Therefore, before move in furniture to do the seam is one of the best, otherwise after entering the furniture such as to move the furniture, it is the same principle and installation of ambry.

after four, good brush metope usually brush to paint on metope lacquer, in construction process will produce a lot of garbage, emulsioni paint is easy to drop in tiles or cracks. If do the seam in advance, later clean more troublesome, also easy to damage the seam an agent, so I can work at the completion of metope, and then to the seam.

in general do beautiful seam should choose the appropriate time, will not delay the decoration process, also won't increase work, but specific operation or to the actual construction schedule shall prevail.

recommended articles:

floor seam ok ( 20 years return to tell you the truth)

ceramic tile stick over how long can the seam

when the seam floor tile spread?

ceramic tile stick over how long can the seam ( Don't be delayed)