How the shop is stuck is good for the interior wall ceramic tile seam

Now many families will not just the ground shop sticks ceramic tile, interior wall can also be beautify the brick wall brick, but whether it's ground ceramic tile or metope stick to do the seam, how the shop is stuck wall brick will facilitate our beautiful seam an agent construction, in order to achieve better beautification.

1, examine the before the construction of basic level processing first need to see whether meet the requirements of shop sticks ceramic tile is whether the original wall is suitable for shop sticks ceramic tile, such as the existence of metope empty drum, craze, metope waterproof, dealing with such problems as whether qualified hair, if these problems, the need for corrective before shop sticks ceramic tile.

2, metope must do the processing of metope hair hair role mainly in order to increase the contact area of the wall and ceramic tile, using cement mortar to shop sticks ceramic tile wall roughening treatment must be carried out.

3, select qualified cement sand ratio and good attention in the process of a family to decorate, shop sticks ceramic tile cement commonly used 32. 5 mp of ordinary Portland cement, river sand in the sand. The wall brick floor tile do when the shop is stuck, cement sand the blending ratio of 1:2.

4, be fixed, ground floor tile prevent falling ceramic tile ceramic tile in the shop is stuck, metope began when the shop is stuck bo changes a brick, to determine the level of good ceramic tile, will start the shop is stuck bo changes a brick using wood square well fixed support, such as preventing just shop sticks ceramic tile drop.

5, the shop is stuck wall spray wet must be conducted before construction of the metope of this project is also very easy to ignore, because metope too dry, to do water wet, the original dry wall is easy to absorb moisture in the cement mortar, leads to the coagulation effect of cement mortar is reduced, resulting in ceramic tile and the situation of the cement mortar layer off, at the same time, moisture quickly absorbed by the metope of cement mortar, solidification shrinkage rate and the hair, leveling layer of metope shrinkage rate, will also lead to cement mortar with metope grassroots delaminating problems.

6, the cement mortar on the reverse of the brick must be full uniform every using cement mortar as a binder to shop sticks ceramic tile, in order to avoid empty drum and the cement mortar on the reverse of the brick must be full uniform.

7, every space according to the layer by circle to the upper berth, prevent ceramic tile drop when the shop is stuck not recommended a wall one side wall of the shop is stuck, whole space can be a layer of a layer of the shop is stuck, a wall of one side wall brick, mainly in order to avoid the cement slurry setting time is short, make ceramic tile generation sag, a circle to spread, the coagulation time also will be more fully, ceramic tile more easily fixed.

8, ceramic tile shop sticks before, during and after completes the product protection when ceramic tile shop is stuck, completes the relevant items of the finished product protection, such as doors and Windows, etc. , to prevent damage, at the same time, timely clean overflow in brick joints of cement mortar, so as to avoid surface mortar defiled.

9, ceramic tile not dry solid jointing processing don't rush to ceramic tile not dry solid immediately to manage the construction joints can cause the loosening of ceramic tile, rugged artificially.

10 acceptance and the shop is stuck, no problem for subsequent again after the installation work of

shop sticks ceramic tile is good after a subsequent seam construction work in the United States: beautiful seam an agent factory beautiful seam construction procedure, rounding