How to check the quality of the beauty joints construction? -Beautiful seam agent factory

The ceramic tiles at home are made of beauty joints. How to check the construction of the beauty joints? How to check the construction quality of beautiful seams? The beauty joint agent construction expert of the beauty joint factory will explain to you, and the construction effect of the beauty joint agent can be judged from the following points:

.Flatness

Use a large leaning ruler to lean on the surface of the tile gap after the construction, and the allowable error is within mm.

.Yin and Yang angle square

The overlap direction at the yin and yang corners is correct. Use a square ruler to check the yin and yang corners of the beauty suture, and the allowable error is within mm.

.Seam straightness

Dense, evenly wide and straight, with a suitable gap at the junction with the wall. The allowable error of the straight line is mm, the allowable error of the width is mm, and the allowable error of the height of the joint is mm.

.Appearance and cleanliness

The surface is clean, without discoloration, efflorescence, and stains. If discoloration occurs, it may be caused by poor quality of the beauty joint agent and poor adhesive strength. If the discoloration is large, it is recommended to re-apply the beauty joint agent.

.Firmness

Insufficient beauty joint material, insufficient soaking of bricks, and improper treatment at the base level will cause the beauty joint agent to hollow.