How to clean up before making the seam ceramic tile aperture?

As life is higher and higher, more and more people know the ceramic tile seam to beauty, beauty construction joints on market now, there are two conditions:

1, brick shop has good, has the seam construction under the condition of caulking;

2, don't do any deal with brick joints under the situation of the construction joints.

no matter what kind of construction, we know that before the seam will be clear. Crack-cleaning work is the first step in the joint work, aperture processing is bad, is bound to affect the ultimate beauty effect. Gap after the qing, for example, the ground not level off and not clean side, the seam after curing, can cause surface uneven, rugged; And the seam is too shallow, stick relay is not strong, and can lead to shorten the service life and beautiful seam and surface will not smooth.

to achieve the best effect of the beauty of the seam, then clean up the gap. How the gap can be removed?

the first step: with box cutters or crack-cleaning taper clean up the impurity within the gap.

step 2: use a brush to clean up the dust clean of impurities.

the third step: with a vacuum cleaner to the aperture carefully blow, secondary clear aperture.

the fourth step: use a dry towel will crack and clean on both sides.

this is the conventional gap cleaning steps. Of course, not all gaps for use clean cone to clean. For example, gap is filled with cement, use clear crack-cleaning cone is too slow too laborious. What's quick and easy way? With Angle grinder.

electric Angle grinder, aim the front-end of circular saw blade gap, will be able to crack in the cement grinding. Before the array with the Angle grinder and, cement were shattered into ashes, and then use clean knife gap within the dust is simpler.

PS: his beautiful seam, the lack of experience, so the crack-cleaning work must spend more time and patience, must clean up the dust debris within the gap.