How to cut the glue's mouth

How beautiful glue mouth cut

1, first of all have a good glue, and then the rubber of rubber mouth to cut flat size and the location of the aluminum alloy glue size; Glue to steady hand cannot shake, coherent whole, glue in one direction, can't pause for many times.

2, that is, by feel, to play much, has the experience and developed naturally.

3, cut a 45 & deg; Angle, the size of the mouth of the seam size, so that can get a good glue, appearance beautiful, also save glue.

4, a 45-degree slope Angle of the incision, such glue level off is smooth, without plating.

5, with wallpaper knife cut, rubber mouth usually has several scale above, is the most at the end of the mouth, and in turn down, you can according to your need to the size of the cut, can start with the minimum cut up.

the sewing skills of sealant

1, the most important thing is that the right hand holding the trigger, the magnitude of the extrusion glass glue must be uniform. Want us to use our usual said & other; Yin force & throughout; , that is, to keep a certain strength, but not when it. The most important thing, is to be with one, not crowded a crowded, pauses, or glass glue on and off, or a large one. Because glass glue is usually just out * mouth, are bigger ball. If a piece of big is small, can only behind with smear method is put on the skin.

2, left hand control mouth, must let the mouth oblique mouth against crack, can not shake.

3, lead to steady, the calibration distance in advance, as far as possible, don't move too much, will be appropriately legs RACES have to open a bit, so that his hands with upper body turn translation or waist, extrusion glass glue line. If the footsteps walking around too much, it is bound to affect the stability of the extrusion glass glue.

4, breathing. Don't be big big breath, keep small breathing, even a brief breathless, let the body don't cry because it is too much shaking breathing.