Professional manufacturer of tile grout and adhesives with 27 years experience

How to fill out before the seam sewing ( A look at will understand)

2020-12-04

Kastar

133

To make ceramic tile on the seam is not what strange things, will eliminate do caulking agent on the seam an agent, is adapt to the development of the era, is also the requirement of increasing the living environment for people. But some owners considering the adornment effect, the seam an agent does not understand its practicality, do the seam need caulking to question.

need a caulking tile seam to do in the United States for the

1. If ceramic tile aperture is deep in the home, doing the seam, need a lot of beautiful seam an agent. Considering the high cost, can do caulking first, then do the seam, it can save some cost. But if you don't care about the cost, also can not caulking, because the seam an agent adhesion strong, enough to fill the gap.

2. Gap has a small amount of cleaning out impurities, can consider to do on caulking, provides a flat bottom for the seam. But some caulking agent quality is bad, will affect the adhesion of seam an agent, lead to the seam an agent is easy to fall off.

3. Ceramic tile aperture itself is only about 3 mm, had better not caulking, because of the depth of 3 mm do just beautiful stitch, if do the caulking, depth is not easy to lead to fall off the seam an agent.

how to fill out before the joint seam

1, full fill construction full fill in ceramic tile aperture is empty, nothing inside, direct to fill the seam an agent, usually 2 - need to do Three times, and even more times. The price is according to the materials to calculate, so 2 - is half filling cost More than 3 times.

2, half fill construction fill half filled with caulking agent filled first, and then use the seam an agent, called half fill construction.