Professional manufacturer of tile grout and adhesives with 27 years experience

How to fill out the seam an agent, The seam an agent to use skills)

2020-12-04

Kastar

Ceramic tile aperture at different times have different way to handle it, most of the time the owner at the time of hiring sticks ceramic tile gap filling will use white cement, so fill the gap at the end of the day will become dark yellow. But some owners would also for cracks on the seam, question, ceramic tile do beautiful seam need to remove the original filled seam an agent? How to fill out the seam an agent? The seam an agent to use skills?

the seam an agent full fill and half to the difference between the

1. Use different

is full fill in gaps without any material, all empty, and half filled part inside have fought caulking agent under the condition of. The beauty of both need seam an agent dosage is different, full fill need stitched dose more beautiful.

2。 Different work difficulty

full fill in will need to clean up the impurity in the gap, and then into the seam an agent, slower glue, spend more time. And fill in the below into the white cement, the gap at the bottom of the request is not high, but you have to set aside about 3 mm depth to the seam an agent, sometimes need to sew.

3。 Cost of different

white cement price is lower, and higher prices of the seam an agent. Full fill you need to use more beautiful seam an agent, the seam of the cost would be higher than half fill some, this also is many owners choose to half fill in one of the reasons.

4。 Effect of different

full fill the gap in the seam an agent, from top to bottom firmly on both sides of the sticks ceramic tile, adhesion is very strong, and waterproof mouldproof anti-separtion effect is very good. But half fill below are using the white cement, if the above the seam an agent dosage is not enough, can appear the phenomenon that falls off the seam an agent, the results vary widely.

5。 Use fixed number of year of different

the seam an agent use fixed number of year is very long, and full fill the use fixed number of year is longer than half filled. Half fill in the gaps of white cement used in the long run, will dry off together as cement mortar, which affects the upper seam an agent to use.

the seam an agent use skills

1, gap to clean, no debris and water, for high water absorption of ceramic tile, can be wet gap in advance.

2, the depth of the crack should not less than 0. 6 ㎝ or brick.

3, porosity of the ceramic tile aperture is too large, should first be facing protection after caulking, lest affect surface or pollution, or using special jointing knife gap filling.

4, the colorful waterproof mouldproof caulking agent press 3. 3 to 3. 5-1 ( Powder: water) Mix mix into a paste without particles, it stand for 3 ~ 5 minutes and then stir 1 ~ 2 minutes.

5, with rubber knife gap filling or soft scraper, the mixed color waterproof mouldproof caulking agent in the diagonal direction along the brick surface pressure into the seam, fill the gaps, and scrape spare parts, construction time is 1 ~ 2 hours.

6, for caulking agent in 24 hours after complete curing, or special cleaning agent with water to remove remaining patches.