How to make ceramic tile right Angle seam beauty?

How to make ceramic tile right Angle seam beauty?

more than floor tile, wall brick construction need to technology to deal with some of the details, such as wall brick juncture, the Angle of the paving when want to make sure that no empty drum, at the same time, the edge processing is also key wall brick, wall brick paving when the walls are generally of Yin and Yang Angle, general tiles Yang Angle with six kinds of methods:

1, the contact Angle processing: ceramic tile on the back of the oblique Angle of 45 degrees

in the back of two ceramic tile to pour a right Angle 45 degrees, the Yang Angle wrapped up, it is called & other; Touch the Angle & throughout; To deal with. Currently, this is the most common method of dealing with Yang Angle. This method in effect is the most beautiful, but because of the Angle of two intersecting after cutting is more thin, if there are any serious impact, it is easy to broken, and difficult to repair. Casting & 45 deg. Angle, be careful not to run into glaze, glaze and set aside nearly a mm line. In addition, when the reverse edge a little bit more, touch the Angle will be more rounded. Had better use machines to do, because the precision of manual chamfering often vary from person to person, greatly inspection the construction master process, once appear error, can affect chamfer effect.

2, procurement Yang Angle of ceramic tile, as long as the normal pavement can then.

on building materials market have special Yang Angle of ceramic tile, can be directly laid in the position of Yang Angle. This kind of practice of brick itself more demanding, not enough density of brick can't do this. In addition, Yang Angle of the MAO embryo of ceramic tile and ceramic tile surface is the same color is best, can appear otherwise edge grinding off color.

3, using the seam an agent

some owners feel, whether grinding 45 & deg; Angle or special processing edge grinding time is too long, just think of space position with the seam an agent. But this method also has drawbacks. On the one hand, the seam an agent bonding strength is not too good in the right place, may appear fall off; On the other hand the seam an agent to apply a large area, if there is leakage from the inside out is very difficult to clean, long may become angry. And the surface of the brick for smooth texture, seam an agent can't consistent with the decorative effect of ceramic tile.

4, wall brick cover Yang Angle directly, don't be cutting processing ceramic tile not

the corner cutting, one piece of brick wall directly stacked on another piece of wall brick. Although this approach can also complete to form a right Angle, treatment is also very convenient, save time, but as a result of embryo directly exposed wall brick, affect beautiful, generally do not recommend this.

5, using part of the thickness of the ceramic tile for chamfering

as mentioned above, the back of the chamfering can lead to brittle ceramic tile, Yang Angle is too sharp, fully use the beautiful corner filled seam an agent is not strong enough. More eclectic approach is to only use ceramic tile is the thickness of the front part of the chamfering, and in part of glaze on the left side. Along with a variety of materials on the market at present, the most common is stainless steel metal and PVC materials. Yang line can be used directly, don't need a chamfer, the future will not because of the wall deformation problems or porcelain collapse phenomenon, and its smooth edges and corners, will not be accidentally scratched, and the processing method is widely used at present.