How to put the ceramic tile adhesive cleared from a wall

Ceramic tile adhesive using one of the many different adhesives on the wall. These hard glue dry hard as rocks bond between ceramic tile, installation on the wall. Some of the adhesive is water soluble and fairly easy to remove, while others require chemical soften them enough to let them take down from the wall. How to successfully eliminated the ceramic tile adhesive and no damage to the wall on the wall, here we introduce some methods. 1, applied some glue a small part of the water. If it is using organic adhesive adhesive, water will begin to soften, let you scrape. If a strong adhesive, water will not be effective, test is just a small area, in order to avoid potential waste their time on you. 2, looking for a way for ceramic tile adhesive or citric acid or base soybean; These products are low volatile organic compounds ( Vocs) , need ventilation than chemical products. Wear gloves and take preventive measures, such as plastic film are placed in the working area, when the use of such a disinfectant. 3, let softening rubber paste on the wall. Regularly check glue; Some glue need to dissolve the binder than others. Never leave the product is too long, because it may again heavy quenching. When the rubber to soften and can be easily through the putty knife, it is ready. 4, wall putty knife soft glue scrape. If you still stubborn spots, an extra layer of adhesive, or with a hammer and chisel gently break hard point. In this paper, from guangzhou to taste the state building materials industrial co. , LTD. Web site, for more information on ceramic tile adhesive can visit: WWW. drymix4u。 com。