In construction of their beautiful seam do bad how to solve?

Oneself construction seam beauty do bad how to solve the

a, shoveling out to construction in the process of construction, error is inevitable, if there are any beautiful seam an agent not stem, white, or the seam an agent appear fall off, will crack problems inside the seam an agent shovel out is ok.

operation method:

1. The seam an agent has not been solidified, colloid sticky, also not hard, can use the knife or sharp tools such as crack-cleaning cone, the beauty of the crack problems in seam an agent shovel out, cracks and once again be removed; If the seam an agent already cured, need to use hot air gun to blow soft seam an agent, with tools to shovel out again.

2。 According to the problems find out the reason, the seam an agent not stem is likely to be encountered in construction on the stain, or aperture is damper, to test the dry degree of aperture, then use the dryer will stain drying, glue again construction finally.

3。 The seam an agent, adhesion is not strong, may be a gap in the dust, to clean up the gap, especially the gap on either side of the impurities must be clean, before construction, will play in ventilation pipe colloid.

2, on the basis of the original repair after

the seam an agent to do think the color is not good-looking, sunken radian is too big, beautiful surface uneven seam an agent, these cases can be directly in the above play a layer, repair, do not need to shovel out to redo the seam an agent.

operation method:

1. Seam an agent that if the chosen color is not good, you can choose when pressure joint seam pressure ball, let beauty seam an agent has certain concave radian, under the seam an agent such as dry after appearing, then choose other color for repair. Under the condition that you must be concave radian, otherwise fill dozen U. S. seam an agent had no position, but also to choose the color more than primary colors to cover them.

2。 Beauty in the cracks under the seam an agent concave radian is too big, and uneven surface, want beauty becomes a bit flat seam an agent, and ceramic tile at best; Can the seam an agent such as dry after appearing, directly on the top layer fill play, only choose a pressure seam to seam pressure plate, can guarantee the effect of flush.