Misunderstanding between six beauty construction joints, afraid you don't know

When do the seam, a lot of steps have a point, can't take it for granted. If the master, owner, please be professional construction can use this time to test their professionalism; If the owner is do-it-yourself construction, I believe these will help you better finish construction!

the seam construction must be done according to the steps, the correct order is: the crack-cleaning, stick or the seam wax crepe paper glue, glue, seam pressure, a shovel, just at the time of operation is also prone to error.

1. Not clear gap directly construction

before making the joint, ceramic tile aperture must clean up, don't have obvious dust and water damage. Some owners get very excited after ceramic filled seam an agent, not clear immediately construction. At this time, the gap in a lot of dust, some very damp, there are obvious traces of caulking. Ceramic filled seam an agent can appear in it, pale, fall off, and so on and so forth, is very serious.

2. Gap cleaning the deeper, the better the

gap must not only clean, also should have certain depth, the depth of the ceramic tile aperture is best at about 3 mm. Many owners are worried about the depth of the crack is not enough, ceramic filled seam an agent is easy to fall off, actually adhesion of ceramic caulking agent not only has asked to the depth, the gap on either side of the clean degree also have requirements. Gap, caulking agent of the demand for ceramics is, the more, also increased the difficulty of the crack-cleaning.

3. Immediately after ceramic tile to stick a good beautiful seam

just stick good ceramic tile, crack in the clean and dry, very suitable for the best, but many owners in ceramic tile just stick a good start to do the seam. Should wait until good ceramic tile stick completely dry before the seam, just stick good at the bottom of the ceramic tile is damper, may affect curing of ceramic filled seam an agent.

4. Rough surface of the ceramic tile glue directly

surface smooth ceramic tile can directly construction glue, surface roughness of ceramic tile, need to put a crepe paper, or on the seam wax to make gum. But many owners think it too troublesome, or don't know what kind of ceramic tile to rough surface, hence directly make gum, the result finally damage glazed ceramic tile, ceramic caulking agent cannot root out directly.

5. Immediately after glue seam pressure

ceramic filled seam an agent needs to wait for the finished gel precipitation later seam pressure, so as to ensure that there is plenty of ceramic caulking agent into the gap, to avoid waste of ceramic filled seam an agent, extruding flat aperture. But if after glue immediately seam pressure, may be a large number of ceramic filled seam an agent as being taken away by seam pressure tool, only a small amount of in aperture.

6. The seam shovel immediately rubber

shovel glue is divided into two cases, one is posted, crepe paper is a kind of wax or sealant directly. Both of which can't press the seam immediately shovel gum, colloidal not stem, will crack the shovel off together. Can be finished with crepe paper adhesive torn off after 10 minutes, wax and direct glue, ceramic caulking agent such as need to shovel adhesive cured totally.