One-component adhesive back and what is the difference between a two-component glue back - Ceramic tile adhesive | | | waterproof coating straight with mortar jointing agent

Ceramic tile is dedicated to stick of gum bo changes a brick hard brick on the back of the handle, low water absorption, improve brick material and the bonding strength between adhesive materials, can effectively solve the common in the process of wet stick bo changes a brick empty drum, fall off wait for a problem. Newari le gum by independent research and development of ceramic tile, Germany imported additives and other components made from through science, its strong bonding performance, is binding wall ceramic tile, Mosaic, marble, the ideal of natural stone products. But the back glue with one-component and it's a two-component, what is the difference between them? The difference between the two is as follows: 1. Construction, a two-component glue coating need to dry in the post, one-component needs such as ivory into transparent, can paste; 2. One-component, afraid of the water in the process of such as dry ash touch touch water ash can fails, a two-component adhesive back does not exist, such as dry, so there is no problem; 3. One-component works, such as need to stack up one layer, but also need to be level off, the turbulence or it will cause pollution of ceramic tile; 4. One-component water resistant ageing resistance, with water or three to five years will be failure, will drop brick, a two-component glue water resistant ageing resistance, the service life of 50 years; 5. Bonding principle, a single set of copy or the original physical bonding, a two-component glue is a chemical bonding. Newari le back glue suitable for surface modification, the basis of not directly, such as the old ceramic tile surface directly renovation; Smooth surface reconstruction from demolished concrete frame templates; Low water absorption tiles on the back of the handle, aerated concrete brick, anhydrite and other base reforming the bibulous rate is high; Other modification to the basis of the normal construction requirements.