Precautions for the construction of tile beauty joint agent! -Beautiful seam agent factory

The width and width of the tile joints are reserved. Generally, the width of the tile joints is mm-mm and the depth is mm-mm. The narrow tile joints have a good overall effect after filling the joints. The wide and hooked brick joints have a good three-dimensional effect and a strong sense of hierarchy. Easy to control the collection size error is small.

Set aside tile joints, you can use positioning crosses to embed in the tile joints, which is easy to ensure that the width of the bricks is the same. Then use ordinary cement or white cement to fill the joints. After filling, use willows to compact the joints to make the joints. It is advisable to keep the depth at about .-.mm.
In the dry period, after the paving and joint filling are completed, the cement material in the joint is dried thoroughly before the joint construction of the beautiful joint agent can be carried out, and the dust in the ceramic tile is removed with a rag.

Precautions for the construction of tile beauty joint agent:

Tool preparation, caulking gun, waste newspaper, used to wipe the nozzle tip of the caulking gun, rag (or sponge)

The choice of the color of the seam agent is generally determined by the customer according to their own preferences, or recommended by our company’s professionals, based on color aesthetics and experience; Young people prefer the color of the seam between bricks and tiles to have a larger contrast. For example, black seams are matched with yellow bricks, gold seams are matched with blue bricks, and middle-aged and elderly people prefer smooth colors.

Operation steps of the beauty seam agent: remove the beauty seam agent discharging nozzle, take off the scraper, clamp the head of the discharging opening with pliers, then install the discharging nozzle, and cut the discharging nozzle with a paper knife If the tile joint is smaller than mm, the tip of the discharge nozzle can be cut off. If the tile joint is larger than mm, a little more can be cut off.

Construction method: Put the beauty joint agent into the glue gun, slowly and forcefully spread the material evenly in the seam, apply a piece of rice to the left, use a scraper, board or fingers to evenly distribute the material in the seam in time Scrape it; only scrape it once. The gloss is better. The right angle of the right angle brick should be thinned. The slope angle brick can be directly coated evenly without scraping, and the overflow should be cut off with a paper knife according to the steel ruler. Disposal of spilled material; if any material spills out of the seam during the leveling process, immediately wipe it clean with a sponge or rag.