Prestressed anchorage of slurry pipeline pressure

Steel wire broken wires refers to the single dumpling in wire line broken wires. Prestressed pipe pressure slurry exceeds list control, the principle should transform; When can't change, under the condition of permission can complement measures, such as raising other beam prestressed value but must meet the requirements of limit state design in different stages of the plate. 3. Prestressed reinforcement in tension control stress reaches stable rear can solid radium. Prestressed pipe pressure slurry to clip type wrong, is at the top of the clamping piece should be flush after, their mutual identity should not be greater than 2 mm, outside and reveal the anchorage height should not be greater than 4 mm. Anchorage completed and confirmed by the inspection qualified rear can cut end redundant prestressed reinforcement, cutting saw, grinding wheel should be adopted when it is forbidden to use arc cutting, shall not damage the anchorage at the same time. 4. Five times the diameter prestressed reinforcement. Prestressed pipe pressure slurry anchorage should use sealing side of concrete protection, when need long naked, should take the measures to prevent corrosion.