Professional ceramic tile seam construction method ( Certification each seam)

Professional beauty seam construction procedure

1, aperture processing, using tools to clean up on both sides of the seam, the purpose is to keep both sides after construction surface black

2, cleaning the health, health gap after use broom to clean the whole surface.

3, vacuuming, clean up dirt in the aperture, avoid glue after scraping gum inside the black line.

4, crepe paper, the surface integral seam stick, crepe paper placed scrape wood adhesive, floor, wooden door, shoe ark, chest, and so on wood products.

5, the sewing glue, glue must be full, otherwise influenced later collapse, fall off consequences, such as the less easy to make the surface is not flat.

6, scraping gum, use tungsten special tools, scraping out will be more smooth surface, ceramic tile cross seam to separate, ceramic tile seam with a plane level best.

7, waiting for curing, porcelain glue 2 - really 3 hours to shovel, porcelain 6 - water Eight hours or so to shovel the glue.

8, plastic shovel, don't pay attention to the surface aperture place with strong shovel knife scrape, clean up the surface of ceramic tile

beauty professional ceramic tile seam note

1, in the use of glue guns into crevices play beautiful seam an agent at a time don't play too long. The seam an agent is a kind of quick-drying products, for beginners to play 20 - at a time It is ok to 30 cm. There are a lot of just into the seam unclear situation, a dozen is very long, had no time to deal with after solidifies, but wipe again after solidification is considerable trouble.

2, before the construction joints crack must not have water. Don't on the ground, such as such as the kitchen and bathroom with water, before doing the sewing must keep the water clean. If ground water is the seam an agent is not easy to solidification, at the same time, the seam after construction should pay attention to indoor ventilation.

3, a sponge surface can only be used once. A glue gun, and perfect after seam an agent with a special scraper, reoccupy sponge overflow the beauty of the seam an agent. Sponge has four plane can be used to wipe the overflow the beauty of the seam an agent, each plane you can only be used once, but as long as the timely use surface cleaning, can be repeated use.

4, avoid touching eyes and skin contact not completely cured material for a long time, and do not let children touch.

5, a two-component seam an agent USES the internal and external rubber blend mode, if there is no construction of more than 30 minutes, the seam an agent within the hose will solidify, pay attention to during the construction time limit.

6, in the cross interface more small brick construction should be in line with the vertical seam first, after the principle of the horizontal seam, in the cross intersection, after playing the seam an agent here to skip the blow gently, make less beautiful seam an agent into the cross stitch.

7, guarantee the construction base must be flat, solid, no dust, don't use poor quality to lay a foundation of white cement, caulking agent, especially a narrow slit.

8, should be taken before using the seam an agent to clean dust with a vacuum cleaner to suck in the ceramic tile aperture, ceramic tile seam on both sides of the towel clean, remove dust, grease and other pollutants, at the same time with clean shovel to remove contaminants on the surface of the ceramic tile.

that is to say today the professional beauty of seam construction matters needing attention, we have to add what can leave a message, let us in the sewing industry grow up together!

recommended articles:

floor tile seam construction steps method.

the ceramic tile seam an agent construction procedure steps ( Quickly learn)

the seam novice how to do the construction joints, the seam an agent factory manufacturers have a trick!

tip: the seam construction seam pressure ( Beginners must see)