Share floor paint construction process

Floor paint construction process to share

( 1) Processing: grinding machine is used to grinding and ground cleaning dust collection. Its construction target for can't is just the end of the new project, make its air basks in a month or so to floor paint construction. And for the processing of the work surface is also very important, such as the site has just been refurbished, the ground will certainly have a lot of sundry, masonry, even including plant it aside for a long time, is bound to have a lot of dust, these will be mutually beneficial clean, provide for the construction of the floor paint a clean environment, such ability can let a floor lacquer to the surface of the sufficient adhesion.

( 2) Scraping epoxy primer, epoxy infiltration cementing primer, to increase the adhesion of the paint layer. Because of uneven gap on the surface of the floor, some rough places will be a lot of cracks or holes, the construction of these will affect the floor paint, so clean the floor surface treatment, also need to apply epoxy closed bottom coating, in order to achieve closed the gap.

( 3) Batch of leveling putty layer: two times of leveling putty layer, in order to better fill up the ground. In buying floor lacquer although its features is very good, but in order to make it have more features, we need to add a certain amount of diluent to make its can infiltrate into the inner surface to increase its permeability.

( 4) Mixing it well roll paint layer: after rolling tung evenly coated with two times wear resistant paint layer.

（ 5) Completion of the maintenance normal can be put into use after a week. In the process of construction and curing emit a certain amount of volatile organic compounds, but the cost is low; And solventless epoxy floor coating accord with environmental protection concept, no emissions of volatile organic compounds.