Spring beauty seam construction, these details can not be careless

For beautiful seam construction, spring is an important season. This is mainly determined by the climatic factors in spring. Summer and winter are the two extreme temperature seasons of the year. The high temperature and heat in summer may cause the thinning of the beauty joint material, which may cause sagging. In winter, the temperature is too low, and the beauty joint material often needs to be heated before it can be used, which increases the difficulty of construction. The climate is relatively stable in spring, and the beauty joint material is placed in a suitable storage environment to ensure that the product properties are stable, so that the beauty joint agent can be adsorbed more firmly in the tile gap. Although the temperature in spring is moderate, it is more suitable for beautiful seam construction, but beautiful seam construction still needs to pay attention to weather conditions and changes in temperature and humidity. Therefore, the following points need to be paid special attention to during the construction of spring beautiful seams. >>>> Properly close the windows during construction. There is a lot of rain in spring. Construction in rainy weather, the humidity is relatively high, which is not conducive to the drying of the beautiful seam products. Therefore, when encountering rainy weather, try to close the windows before starting the beautiful seam construction. >>>>Check whether the gap is completely dry. When cleaning the gap, pay attention to whether the inside of the tile gap is completely dry. If the dust sucked out by the vacuum cleaner is muddy, you need to close the windows and perform beautiful seam construction in a few days. If it is only the phenomenon of regaining moisture on the surface of the tile, wipe both ends of the gap with a dry sponge or rag before the beauty joint construction to ensure that no water is touched during the beauty joint construction process and prevent the beauty joint agent from discoloring when exposed to water. >>>>Check the joints before the construction of the beautiful joints. If the owner’s tiles have been filled with joints in advance, in addition to checking the dryness of the edges of the tile gaps before the construction of the joints, you also need to check whether the joints at the bottom of the tiles are completely dry . >>>>Clean up the remaining materials and check and accept the surplus materials and acceptance after the completion of the beautiful seam construction. If it is found that some of the beautiful sewing products fall off and produce bubbles during the acceptance, the problem must be handled promptly and properly. This is not only to make up for unexpected situations in the construction, but also to reflect the professionalism and sense of responsibility of the beautiful seam construction staff. >>>>Precautions in the later stage After the acceptance of the beautiful seam construction, do not rush to move the furniture into the room. In the daily maintenance and cleaning, do not use strong acid and strong alkali cleaning agents to wipe the beautiful seam parts forcefully. Because the average daily temperature in spring is above ℃, such a constant and suitable temperature can make Meisewn products stable and dry, and it is easy to achieve the expected construction effect. Beauty Seam Factory Beauty Seam Agent, a trusted brand.

Beautiful seam construction spring