The beauty of epoxy color sand do seam, hard and thick, how to deal with,

The seam there are many places need to be aware of, if not careful do fail, also is normal, even professional beauty seam masters have error of time. Failure can be repaired in a timely manner, the seam actually do method is simple, is very time consuming. But if made of epoxy sand texture beauty seam, hard and thick, how to deal with, also have the opportunity to remedy?

ceramic filled seam an grout to do the seam is very good remedy, with professional tools according to specific circumstances, if with epoxy color sand, situation is the same, according to circumstances to remedy. To do the seam remedy the failure of two cases, one is already cured the beauty of the seam, one kind is not the beauty of curing seam.

a, has the beauty of curing seam

already cured sand texture ceramic filled seam an grout is very hard, want to weed it out directly the possibility is very small, and the adhesion of epoxy sand texture is very strong, as long as you stick with bare hands inside the crack is hard to clean up. Using a brute force is unable to eradicate. Needed a industrial heat gun, with hot air heat cured sand texture to first, to soften it, with the wind cone will soften pick out the color sand. Although the color sand hardness is not high, but more sticky, need careful will clean up the gap, and then can continue to make gum.

2, not cure the beauty of the seam

has not been solidified ceramic filled seam an grout is very sticky, especially sand texture, but also is easy to clean, do not need to use heat gun, with the wind will pick out the color sand cone directly. Colour sand are water-based products, if you accidentally get on, be sure to clean up in time. The crack in the residual color sand can also use a wet towel to wipe clean. But before the next construction, must will crack drying, such ability to redo the seam, or moisture will influence the sewing effect.

the seam after must check it again, before the color sand curing remedy as far as possible, so that can save a lot of time. If just don't like the color of color sand, can wait for color sand curing, see above whether there is any space to play. Directly on the top layer to do other color, the color of the cover before, also can avoid sand shovel give prize of trouble.

In the past few decades, shower tile grout sealer production has increased because of the use of tile grout.

Kastar Adhesive Co.,Ltd. attaches great importance to customers and assists them in achieving their demands.

We sells tile grout and focus on operational procedure and manufacturing facilities professional grout.