The construction method of epoxy color sand, 30 seconds to master core steps

Will mix colour sand into the seam, swab with clean cloth after 30 minutes, 24 hours after can step on it.

this is known as the thin books we read, to remember the core.

remember the core, we are going to take the books to read, thick and then expand the concrete operation according to the core. Key points:

1, stir well,

2, blow into the seam in

3, 30 minutes after the scrub

4, 24 hours after can trample

mix:

in epoxy color sand brick li, for example, its two components: A B to mix and stir, generally 1 to room temperature 3 minutes can stir very evenly.

blew into the seam:

with scraper with 45 & deg; Angle of the colored sand blowing into the seam ( Need fan Angle when shave, to fill the ceramic tile seam on the inside as far as possible)

30 minutes after the scrub:

30 minutes, with a clean cloth tile circle scrubbing ( Such as brick color epoxy sand will send towel, then can use grid towel scrub: first rough surface, fine flour after scrubbing, finally with pure cotton towel to wipe clean. ）

24 hours can trample:

normal temperature is about 24 hours. If it is the northern ice and snow, to delay the trample time appropriately.

this is epoxy color sand construction need to be aware of when. Here also remind before construction must pay attention to the crack-cleaning ( Remove dirt, keep dry, this can prevent caulking appear black border, and so on and so forth. ）

control core, you can easily carry construction.