Professional manufacturer of tile grout and adhesives with 27 years experience

The most good-looking (seam leave much gap How much of a gap? ）

2020-12-04

Kastar

133

Ceramic tile shop sticks must stay seaming, it is a basic common sense. However, because many customers don't know the professional knowledge of tiles, reluctant to leave the shop is stuck. At this point, we will be very frankly that the shop is stuck to the customer and the seam is not sew the advantages and disadvantages of the shop is stuck, seam and leave the consequences of the shop is stuck, let the customer to decide whether the seam.

the seam look better leave much gap:

the seam leave much gap look better? Actually, leave how much of a gap, there is no unified regulation, want to decide according to the types of brick, such as: ceramic tile seam is smaller, qualitative brick to seam is larger, if the sitting room to ceramic tile seam is 2 mm or so, metope brick to 1 - seam 1. Five or so, ground brick to 2 - seam Around 3, if the special specifications of brick is 3 - seam 5. But these data can only be used as a reference, specific still should listen to the opinions of the decoration master, so as not to cause trouble in the late.

the seam an agent construction process:

1, ready for tools, bring your gloves, lest flyblown fingers.

2, with a knife or brush cleaning aperture stains.

3, put beautiful lines in the gap on both sides of the paper.

4, install the seam an agent on the glue guns.

5, hold the glue guns and play beautiful seam an agent.

6, the beautiful seam an agent with scraper uniform scraping.

7, use a sponge, clean up the beauty of excess seam an agent.

8, tear crepe paper.

seam an agent construction matters needing attention in the United States:

1, when construction, do not use too sharp objects to poke aperture, do not use strong acid alkali, otherwise it will damage the effect of the seam an agent.

2, if the ground free of drum, the leveling or replace new ceramic tile, in can use the seam an agent, because, empty drum, ground deformation will happen on the above, beyond the seam an agent, it is easy to cause the fall off seam an agent.

3, during construction, pay attention to the time, best before the furniture comes into play, such beautiful seam an agent need not move back and forth and furniture to bring destruction. In addition, the seam an agent construction requirements are high, construction are out of dust, water, grease and other impurities, or have an impact on the effect of the seam an agent.

4, before use, first with gap filling agent, such as the ground flat, in besmear beautiful seam an agent, such effect is better.

5, it is a quick-drying type products, so the construction of a maximum of 1250 px, will use a wet sponge to remove spilled product, otherwise you will not touch on the ceramic tile down, or use a tool to remove, there will be a small amount of residual, one step will become dark, affect the overall decoration effect.