Professional manufacturer of tile grout and adhesives with 27 years experience

The seam an agent construction method, and the matters needing attention

2020-12-04

Kastar

147

Beauty of ceramic tile seam an agent construction can be used for ceramic tile, Mosaic, stone, glass, wood, aluminum and other materials crack decoration, at the same time has the waterproof, impermeability, non-stick oil, and many other advantages. Beauty so ceramic tile seam an agent construction method which steps and matters needing attention of construction? Let us together and see it, hope you have beauty in ceramic tile seam an agent construction reference.

the first step: slot crack-cleaning

shovel ceramic tile aperture: about 0. 8 mm groove, groove on both sides of the ceramic tile edge. Use brush to clean dust and vacuum cleaners clean up, the ceramic tile seam clean up dirt from the inside, ensure no water inside, powder, etc. Using wet cloth to wipe the surface of ceramic tile again. But must be clean, dry in ceramic tile aperture.

step 2:

rifle took out the seam an agent prepared product, the discharging mouth screws into the seam an agent on the discharging mouth of the loaded gun, ready to glue. （ The front end before glue 1 0 g material waste, so as not to affect the construction effect. Mixing tube incision less than the width of the ceramic tile aperture. Light brick from post, crepe paper, the ancient brick, brick tiles stick as far as possible) 。

the third step: make gum

pay attention to after the first vertical horizontal, firstly started to ceramic tile aperture, which can adjust the speed of electric stronger, if is to disturb the process of manual don't stay too much, so as to avoid into the air.

the fourth step: seam pressure

ball joint, cross interface, full of sealant patiently, to render the full effect.

step 5: shovel gum

to remove excess stock, not to stick with a shovel knife to remove residual material of crepe paper, stickers can easily pick up the crepe paper, crepe paper and put the garbage into the trash. Remove the remaining material on both sides of the crack.

construction points for attention in

1, in ceramic tile seam an agent do not use sharp objects in the construction process of stamp

2, cannot be used mixed with acid alkali substances can destroy the seam an agent.

3, in the place where the empty drum ceramic tile beauty cannot use ceramic tile seam an agent

4, ceramic tile seam an agent construction time generally before into furniture not only leave out the trouble of moving furniture, at the same time, it will not bring destruction to the seam an agent

5, the ceramic tile seam an agent construction ceramic tile aperture cannot have water, dust, grease and other impurities, beauty of ceramic tile seam an agent construction need to fill the bottom seam an agent, the smooth beautiful seam an agent will be the better the results.