The seam construction method of the color sand?

The seam color sand construction methods:

1. Crack-cleaning: will clean up the gap, mainly is obvious and dust particles inside, waterborne epoxy color sand belongs to the product, also keep aperture clean dry, can not have water damage. Gap have 2 mm width at the same time, the depth of more than 3 mm, convenient construction;

​2. Hybrid materials: mix colour sand of various materials according to the proportion, pour to stir in the container, can't add water, can only use the original materials; Stir until smooth and no agglomeration degree, then the color sand liquidity is very good, can be directly used for the construction;

​3. Caulking: sand scraper for each use a small amount of color, the color sand fills the gap in the center, will again overflow aperture of colored sand, leveling, repeat this step until you fill the gap, gap redundant color sand can be repeated use, just need to flatten compaction sand texture, caulking not skills, but there is a time limit;

​4. Scrub ceramic tile: after filling the color sand have to be cleaned in time, will scrub clean ceramic tile surface, with a damp sponge. Wet dishcloth, scrub ceramic tile in the form of a circle, especially the gap edge with the color sand, try not to rub into the gap, to swab repeatedly for many times, how to wash sponge in water, until the tiles with particular clarity, reoccupy does cloth to dry water stains.

the seam an agent steps of sealant is more complex, but the shovel glue very easily, and the epoxy sand texture gap filling process is simpler, but wash steps are complicated, and scrubbing winter is difficult. The two products are different, the owners can measure the pros and cons to choose to suit oneself.