The seam construction process and steps, according to the order of the construction

Cosmetics beauty seam an agent is like ceramic tile, can foil a ceramic tile is not only the elegant noble, can also cleverly conceal defects of ceramic tile aperture, for example. Edge collapse porcelain of ceramic tile aperture, aperture size, interface defects, etc. And reveal the seam an agent is beautiful beautiful at the same time, also have played an important role in protection of ceramic tile.

1, ceramic tile aperture processing; Seam before the construction joints, first of all, is to take out the CARDS again qing construction joints, mainly to clear the cement in the ceramic tile aperture, stains, use clean after sewing knife cement loose, remember, don't make ceramic tile aperture collapsed, otherwise very trouble. Clean the crack of cement dust suction vacuum, including nook and cranny are clean. Finally is stitch work, every crack wipe clean with cloth, hand touch dirt. Crack-cleaning aim is to have a clean and neat construction environment, so that make to the beauty of the sewing effect and the quality is guaranteed, the most important thing is to extend the service life of the seam an agent.

2, the construction of sealant; The seam glue also is to have cultured, before the formal glue, squeeze out 10 - first The beauty of 20 cm seam an agent, because these beautiful seam an agent mixed uneven, playing to the ceramic tile aperture will not cure! Glue to the uniform speed, can neither too fast nor too slow and beautiful seam an agent will be full of typing even just right. Play more waste materials glue, glue less beautiful seam an agent does not cover the gap, the back seam pressure there will be a bubble, the phenomenon such as a drum.

if the beauty of barrel seam an agent, you need to use small scraper to sew the agent first mix, with a big scraping board will beautiful seam an agent into the ceramic tile aperture, the beautiful seam an agent, leveling the beauty of excess seam shave again. Prepare a bucket of water, wet sponge to wipe after the seam an agent, sponge dirty to frequently wash, clean to sew the remaining material. With a microfiber cloth to wipe it again after ceramic tile aperture, and the surface of ceramic tile, clean ceramic tile surface, no beautiful stitch residues.

fill scraping the seam an agent construction

3, construction joints; Seam pressure seam also speaking skills, the seam pressure plate to 45 degree Angle average pressure, especially through the cross, strive for a pressure, transverse after straight first, remember that cannot be repeated pressure seam, can appear otherwise interface, affect beautiful.

seam caulking agent of epoxy resin and sand texture beauty, if it's bottled, with seam pressure joint board can, if it's bottled, so, seam pressure scrape to evenness with scraper, reoccupy sponge to wipe clean. Remember, the seam an agent of epoxy resin and the color sand seam an agent, must wipe up the seam residues, otherwise, the late ceramic tile can have obvious marks on the surface, influence the sewing effect.

4, shovel edge & lt; Clean up the seam excess stock & gt; ； Only need to shovel a two-component beautiful seam an agent, and the seam an agent of epoxy resin and sand texture beauty seam, water porcelain beauty seam, etc. , there is no need to shovel edge cleaning more than expected, because when scraping the seam an agent, have been sew the remaining material is clean.