The seam do have failed to do, can remedy, can

The seam failed to do? Many owners heard ceramic filled seam an agent is permanent, ceramic tile has done a beautiful seam will not be able to make the change, failed to do also can't rework redo. It isn't so, a lot of beautiful seam rework chefs don't want to waste time, just fool the owner, but in fact, to do the beauty of failed seam is can remedy, can also be done again.

joint on both sides of the ceramic tile, ceramic caulking agent adhesion is hard to fall off, but a crack in the use of methods can be ceramic caulking agent shovel down, handled well can do it again in the gap on the seam. Specific operation according to the different situation to decide, some simple, some are more complicated.

1, the beauty of freshly prepared sew a small flaw, want to undertake secondary construction

the beauty of freshly prepared seam hasn't cure, can use the crack-cleaning cone all ceramic filled seam an agent problems by shovel out, gap must be removed, can't leave before ceramic filled seam an agent. Gap is wet, water damage, and then test if everything is normal, can according to the previous step to the construction, in order to joint not break away from, ceramic filled seam an agent can be covered on the flank of ceramic filled seam an agent, but there will be a rough surface, have no way to avoid this.

2, beautiful stitch use for many years, want to redo a new beautiful seam

for a ceramic filled seam an agent of this already cured, need to blow soft ceramic caulking agent then, with a heat gun to blow for a period of time, under the influence of high temperature for a long time, it is softened, ceramic filled seam an agent, and then use clean seam cone to ceramic filled seam an agent shovel out, clean up before the next step. If the gap for many years, is used to see if there are impurities inside, clean up the need to redo the seam.

3, do a good job in the beauty of the seam color is not right, want to redo the

there are two construction method of this kind of situation is a kind of method according to the specification, the suitable ceramic caulking agents will not be shoveled redo, so more troublesome. And there's a kind of in the existing caulking agent was covered a layer of ceramic, use brunet ceramic filled seam an agent to cover the light color fastens, will be more convenient, but is only suitable for making effect has a concave arc under the gap, if flush filled seam an agent and ceramic tile, ceramic, need to shovel out the construction.

ceramic filled seam an agent is not permanent, also is not a one-off, but ceramic filled seam an agent rework also laborious. Before making the joint must be repeatedly to determine color, effect and construction environment, once appear, not satisfied with place, please change to fill in the first.