The seam do not do? This guide, please accept it

Seam is why

1. Tile heat bilges cold shrink

temperature and humidity changes, and will be the expansion of cement mortar, ceramic tile, if no seam, the ceramic tile of the drum or cracking may appear.

2. Ceramic tile size

mechanization production error doesn't guarantee a 100% perfect, small size error accumulation to a certain amount, will affect the smooth and beautiful, the adjustment of the seam is given a certain space.

3. Construction workers exist error

the error in the process of construction is also a big reason, after all, we are not pixels eye, if error is more, even affect the continuity of the ceramic tile shop sticks.

color choose

' Depth collocation 】 Such as the kitchen toilet small white brick seam with black beauty, clean and concise, the wind is especially suitable for northern Europe.

note that the light color beautiful seam easily gone, like the kind with a sense of beautiful seam an agent, silver could sew brick under the cement color of reflection.

【 The same color collocation 】 Is the safest color scheme, are generally used for archaize brick and wood grain brick, especially those with complex pattern of ceramic tile. When doing

ceramic tile is one week after the shop is stuck, ambry to do before the ceiling and furniture.

if it is pointing, ceramic tile stick 1 - 2 days can make bricklayer's directly.

if it is a beautiful seam, 3 - after a ceramic tile to stick 7 days would be appropriate, because the cement mortar all dried up, the seam filling will be more full uniform.

fill or half full?

fill half full fill is targeted at the seam an agent used in proportion, not don't fill!

【 Full fill 】 Is not pointing, using pure beauty seam an agent caulking, the cost would be higher, if the gap is deep, there will be the possibility of collapse.

【 Half fill 】 Is firstly, backing with jointing agent in the crevice as, with the remaining surface beauty is filled seam an agent, the general recommended when gap more than 4 mm.

half fill while reduce the cost, but due to the fluctuation is not the same kind of material, robustness will be some difference, the service life of the relatively short; And when the render jointing agent is too dry, the seam an agent is too thin, peeling weather-shack phenomenon may arise when completed, need to redo.