Professional manufacturer of tile grout and adhesives with 27 years experience

The seam gun ( New beautiful seam sewing division will see teach you how to use the gun)

2020-12-07

Kastar

115

1. Understand the seam gun

the seam gun is basically a hollow metal cylinder, the top opening, link at the bottom of the handle and triggers. The ends of the cylinder is a closed circle with hole, front end can be loaded into the seam an agent pipe nozzle, through the backend has a straight seam metal bar extrusion of beauty, in the inside of the cylinder is triggering rod connected to the disc.

2. To prepare the seam an agent

packed in the seam gun before, first of all to prepare the seam an agent pipe, the pipe is relatively narrow, the front have plastic nozzle or nozzles, at the rear end of the tube and the tube body of the material is different, it is sealed with removable plastic tray, spray nozzle in the extrusion of beads get a knife and cut it out, cutting the hole size should be between the diameter of 3 mm to 6 mm, need cutting cutting edge Angle, when holding the gun nozzle flush joint surface can keep and beauty.

3. The gun installation

ready after pipe, now it can be loaded into the seam gun, holding grips, pull back out from the back-end rod at the same time, the older the seam may need to stem gun rotated 90 degrees to pull back, the latest beauty only need to slide back seam gun, will open the seam an agent tube into the spray gun in the mouth, nozzle in the front. Will open the front end of the nozzle glides across the gun, and then move it forward, hold down the trigger and manually will now connected to the push rod in the front of the disc to the backend.

4. Test the seam gun

after the installation is complete, use squeeze the trigger, feel beautiful seam an agent pipe resistance, pressure will force the seam an agent from the nozzle tip.