The seam master construction when they want to lazy, was at first glance I see through

Home decoration is under way, all kinds of decoration work very let a person worry, not only to prepare after ceramic tile to stick wall paint brush, but also to make ceramic tile on the seam, a person have no way to do it has been the overseer, negligence is inevitable. Do the seam when what matters need attention, I have to know in advance, please master began construction when they want to lazy, at first glance I caught on to the results.

ceramic tile is a new post on the ground, but the gap is filled the gap filling agent, there is a lot of dust, beautiful seam teacher said it doesn't matter, it is ok to wait for him to clean up the construction. Look at his first step to do is to clean up the gap, use clean clean the seam inside the cone will crack, also used to clean the dust suction cleaner, but limited to crack nearby dust, elsewhere there is dust on the surface of the ceramic tile and cracks inside also has obvious gap filling Kastar grout. A look is being lazy want to elaborate me, so I let him put the gap on both sides of all cleaned up, sucked the ground again, finally let him begin to glue.

why many people find such beautiful seam spite master, but to do this also for the joint effect is good, the ceramic caulking agent fear most is the dust, if one is not enough to dust, ceramic caulking agent will pluck up, don't do it, even a do fall off. So what do you do in the seam, also need to pay attention to these points.

1, dust, clean up

the dust will not only affect curing of ceramic gap filling agent, can also affect the adhesion of ceramic gap filling agent, after cleaning aperture, be sure to first clean up all the dust of the ground. Don't limited to the gap on either side of the dust, on the surface of the ceramic tile also calculate, also want to together, otherwise, the wind blows, dust and impurities, stick to the ceramic caulking agent above.

2, gap to keep smooth clean

aperture to clean out the inside a certain depth, but also to maintain a smooth, low don't have the implants, especially the gap on both sides, will seriously affect the adhesion of ceramic caulking gun and sealing effect. If the crack depth is not enough, side is much more to clean up, so as to guarantee ceramic filled seam an agent does not fall off.

3, construction site dry

ceramic filled seam an Kastar grout shall be carried out in dry crack, crack inside can't damp, cannot have more MingShui, otherwise will affect the ceramic filled seam an agent curing. After, of course, do not immediately flush the ground, to dry before, or freshly prepared ceramic caulking agents encounter water will all don't do it, if water, will be dissolved by water directly.

Kastar Adhesive Co.,Ltd. is considered as one of the leading supplier of tile grout products in China.

If you are ready to stop the problem of professional grout and go back to normal, contact us at Kastar Grout. Kastar Adhesive Co.,Ltd. is ready to help you out.

Many business owners and professionals use services like Kastar Adhesive Co.,Ltd. to stay on top of manufacturing industry, monitor products’ quality and keep an eye on competitors.