The seam to do fast and good, After watching you know)

Now whether the ground of the house, or walls, basically can use ceramic tile, ceramic tile is also really good, and high performance is the most important, don't need to spend how much. At ordinary times are more simple, convenient and clean the floor is dirty, with wet mop literally dragged it is very clean. This is why the ground and wall are prefer to use ceramic tile, but there is a problem with tiles is there will be a gap between, if do not good is ugly, can do the seam of a processing usually late.

the seam to do fast and well

will please a lot of people do the seam processing outside people to do, in fact completely don't have the necessary, as long as careful to look at to know, actually like this kind of the seam processing is relatively simple. As long as got the hang of, completely can be done. If beauty is doing this kind of ceramic tile seam, the first thing you have to have material, these materials are generally in a store or online can be bought, it is not difficult. Basic tools that used to make the seam are beautiful seam an agent, the sewing knife, such as sewing paper and so on, even if it's a whole set of buy need to spend a lot of money.

make your own beauty sewing materials ready, then is the first step to do the sewing processing, namely clean ceramic tile aperture. Before making the joint must be those things to clean up the gaps in the middle of ceramic tile. As some of the dust, dirt, etc. Or you don't take these things to clean up, the late make seam to the beauty of nature is also effect is very poor, not good-looking. Like paper if the seam is some of the common tape can be used in place of, the concrete is give it on both sides with the ceramic tile adhesive paper, and then to pile inside the seam an agent, that would not give dirty on both sides of the tile. Crowded the seam crowded this step is the key, we used the glue gun efforts must treat me good, moderate, as far as possible to do one pace reachs the designated position, so that make to the beauty of the seam is perfect, also won't let water vapor infiltration in later, appearance is good-looking.

the seam an agent's method of use:

1. At 5 ℃ - 35 ℃ environment construction, guarantee the colloid can easily hit. If the temperature is lower than 15 ℃, colloid is hard to play, you can use around 60 ℃ hot water soak for 10 minutes, bottle down.

2. Before construction, must first clean up around the ceramic tile, ceramic tile aperture, in particular, can not leave dust and tar, guarantee the construction environment of dry.

3. Will beautiful seam an agent is installed on the glue guns, open the bottle of seam an agent, according to the hose, colloid without extrusion 30 cm, guarantee to the seam an agent after the paint and curing agent.

4. According to the size of ceramic tile aperture, hose mouth cut at an Angle, convenient sizing.

5. Sizing on ceramic tile, even to the seam an agent into the gap, after waiting for 15 minutes, can use scraper or seam pressure ball will beautiful seam an agent, leveling the corner need to be repeated several times. If it is a rough surface of ceramic tile, need to put a crepe paper ahead of time, and then glue.

6. The seam an agent cured, such as redundant beauty of ceramic tile surface with plastic shovel seam an agent, usually need about 2 days. If it is with the ceramic tile of crepe paper, need 30 minutes after the seam pressure, will tear crepe paper, and then wait for curing.

recommended articles:

the seam to do ( Two minutes to learn their beautiful seam, save money and effort)

the seam on yourself? （ First to know the five pitfalls)

themselves do the seam, Professional chefs are good, teach everyone)

when the seam do it ( It is generally done wrong)