Professional manufacturer of tile grout and adhesives with 27 years experience

The seam to do ( Watching the steps is very simple! ）

2020-12-04

Kastar

128

Do the seam is very simple, but not everyone can do, will do also is not the same as everyone can do it. In fact, if you want to do the seam is not difficult, as long as you understand the construction procedure and is not difficult to do the beauty of the seam.

the seam do

the seam is actually very simple, step is that a few steps, remember oneself also can do a good job in the home, the seam construction steps are as follows; Colors to qing seam to seam wipe dust collection ~ ~ ~ of sealant seam pressure ~ ~ inspection and acceptance of shovel edge, understand these you can say will make the seam.

the seam construction procedure

the first step: before construction, need to clean up the gaps between the floor brick dust, debris, can use a vacuum cleaner to clean up, or use a broom to clean, do ceramic tile aperture is dry, no dust, without sundry, so it is not easy to appear uneven ground or empty drum phenomenon.

step 2: paste: crepe paper if the ceramic tile of archaize brick or inferior smooth brick, the seam should be posted or crepe paper before the seam wax, stick the crepe paper, cracks on the surface of the ceramic tile to keep clean and dry. Crepe paper to tile in gap on both sides. If it is not smooth floor tile, don't need to.

the third step: choose to color the seam an agent, set up the special mixing tube, put on special high quality energy glue gun, 30 to squeeze to remove the front 40 cm seam an agent, such beautiful seam an agent can make fully mixing. Play is expected to try to keep uniform, full play.

the fourth step: pressure joint, with pressure seam tool seam, smooth evenly force as far as possible, when the cross stitch in the middle to outside pressure.

step 5:8 hours or so perfect seam an agent, can use the shovel to clean up the seam an agent more than expected, the construction completion to fully cure the beauty on the surface of the floor tile seam an agent, such as normal use after 24 hours.

the seam is simple, but still need to pay attention to some matters:

1, when the seam an agent, gap must be kept dry, no dust, it is very important.

2, the backing with caulking agent under the situation, need to use good quality gap filling agent, the poor quality of powder, so the seam an agent is glue rickety, because anything in flour is not adhere to it.

3, ceramic tile, for new shop to shop in good brick after a week, until all the cement dry, otherwise get damp below will affect the seam an agent of the fixed-line.