The temperature on the ceramic tile seam construction have affected?

The temperature on the ceramic tile seam construction have affected?

a lot of people are out of ceramic tile aperture construction is affected by temperature, the temperature is too high, the nature of the seam an agent will be damaged, the low temperature, curing is slow, so the temperature is too high and low are not good. How many degrees at room temperature when the most suitable for the construction joints?

because the seam construction, subject to the limit of the temperature, and the northeast express delivery is not below zero, many teachers are to avoid the hot summer and cold winter, the seam an agent construction optimum temperature should be 5 - at room temperature 25 degrees Celsius. Specific circumstances the seam an agent factory small make up for the following two simple explain for everybody.

1, the winter can do the seam?

through our professional research and development personnel experimental verification, in the winter the seam has no effect on our products. Need to pay attention to, indoor temperature is not lower than 5 degrees can be beautiful seam construction, in order to guarantee good results, in winter do the seam don't open doors and Windows. Our products belong to high-end brand of environmental protection, hard and flexible, anti-freezing effect is good, ceramic tile and the gap will not cause any influence.

2, have any effect for central heating in the winter to sew?

heating heating for many decorate material is really a challenge, if it is not environmental protection material, itself will send out a lot of formaldehyde, benzene, xylene, harmful material such as all kinds of volatile matter, if again a heating, the doubly the harm of human body, some people in after decorates skin allergies, respiratory diseases, and even cause cancer.

if the user's own construction, in addition to avoid the influence of temperature, but also pay attention to other factors, such as the seam an agent construction before the clean degree of aperture or aperture is dry, and the choice of the seam an agent is door knowledge, the toughness slightly smaller than toughness ceramic tile seam an agent, so as to conform to the ceramic tile expansion joints, prevent separation and ceramic tile brick joints crack;

at the same time, the strength of the seam an agent should be large roughness should be high, so as to ensure the seam, and leveled, brick face brick joints would not concave appear beautiful seam an agent, shelter evil people and practices easily collapse, the problem of pollution is difficult to clean up.

the beautiful seam an agent factory company joint series products, green environmental protection, by the national authoritative department detection, the indicators all meet the national standards. And the sewing materials, advanced technology, heating heating will not endanger human body health not only, and the flexibility of the product itself can effectively protect the ceramic tile. So families with heating the seam must choose environmental protection products, hard and tough.

so that we can consumers at any time for a family to decorate, and will not delay the project schedule, and can help people keep consumption to a minimum. Beautiful seam an agent factory beautiful stitch brand is absolutely your home decoration of choice! Information for a more beautiful seam an agent, can be found at wuhan seam an agent factory building materials co. , LTD's website for more consultation!