The use of ceramic tile polisher

Home made beautiful stitch a lot of time need to wax of ceramic tile, the ceramic tile aperture on both sides in a uniform layer of wax, can effectively prevent the touch on the edge of the ceramic tile seam an agent, and later to remove edge aperture colloid is also very convenient, just need to clean off the wax layer, to avoid the spatula knife cut ceramic tile, especially archaize brick. The seam after two days all dry, with a spatula knife redundant beautiful seam an agent to shovel off line, due to advance a dozen wax, very convenient to operate, the ceramic tile polisher will come in handy.

what needs polishing ceramic tile

polished tile polishing brick is polished tile substrate that open system, polishing processing of a kind of light. Belong to the brick. Polishing brick most outside the kitchen, bathroom space use. Polishing brick is easy dirty, non-slip performance is bad, after polishing can effectively make up for these shortcomings.

bo changes a brick

bo changes a brick belongs to high temperature ceramic brick, polishing brick is strengthened. Bo changes a brick through professional abrasive polishing brightness. Bo changes a brick of a lot of imitation marble colors, more consistent uniform distribution of liberal arts, is loved by people. Bo changes a brick after polishing, pore dirt, oil or infiltration. In the absence of an anti-fouling processing wax bo changes a brick in use also need protection.

glazed pottery, archaize brick

because glazed pottery, archaize brick surface with glaze ceramic tile of burn, not only increased the aesthetic effect of ceramic tile glaze layer, at the same time has played a very good antifouling effect. Glazed tile more suitable for kitchen, bathroom, balcony, do not need to wax. Mosaic and glazed ceramic tile material is the same, more suitable for the kitchen toilet, wax liquid does not need to.

the use of the ceramic tile polisher

1, check the power, plug and socket are in good condition before use, so as to avoid leakage.

2, check whether the polishing pad is installed firmly.

3, left hand holding down the left hand after normal adjustment switch, appropriate adjustment direction of push rod Angle to 45 degrees.

4, hands clenched hand, feet calm to his feet, elbows tight around the waist, right hand holding the button, feel the polishing action.

5, and confirmed after normal, from left to right with slow moving polishing machine, pressing down on them with your hands, and polishing machine left, both hands to lift, polishing machine moves to the right. Movement speed for actual finish polishing surface fitting for degrees.

recommended reading: the ceramic tile seam construction paste wax crepe paper and what's the difference?