There was a problem of ceramic tile jointing how to deal with

Gap filling agent, also known as sealing agent, jointing agent, used to fill the posted on the wall or floor tile or joint between natural stone materials. Matching the appropriate cement ceramic tile seam filling agent is suitable for indoor and outdoor, to match the adornment material such as ceramic tile, stone, with beautiful surface and coherence between the face brick, etc. High quality ceramic tile seam filling agent can reduce the stress of the walls or floors inside the cover material, protect tile base materials from mechanical damage and water penetration into the negative effect of the whole building.

in the past when ceramic tile caulking multi-purpose white cement powder, wipe the surface cracks in the ceramic tile white cement did not cure, bond strength and water proofing property is poor, or encounter cold thermal cracks will appear after dehydration, the outer wall, such as the bathroom floor tile of wall of ooze water. In recent years, as the design progressed. A lot of building exterior and interior decoration, the shop is stuck is more and more exquisite, use color ceramic tile gap filling agent is bound to become a highlight the whole beautiful exterior wall tiles or lines are the preferred products.

but now with the building materials product is increasing, the construction team of professional enough, good and evil people mixed up products full of construction industry, leading to jointing material problems more and more, also more and more various problems occurred. Problems will now jointing process list as follows, hope to be of help:

1, the hook out of the seam on the surface of white powder,

the main reason may be:

1) surface is not out of the early works of rinse;

(2) after construction before early dry from the rain;

(3) powder and water ratio is not appropriate, watering too much;

4. Preliminary cleaning sponge used in wet;

5. Wet at the grass-roots level.

the solution:

(1) early dry again after cleaning, About 24 h) ;

2. Don't outside in rainy day construction and maintenance, if appropriate, use appropriate water-cement ratio and construction;

3. Preliminary scrubbing sponge to twist dry;

(4) base is dry before construction.

2, cracking or jointing agent and ceramic tile adhesive is not strong

the reason mainly is:

(1) pointing has passed the sort of good jointing grout can use time ( Open time) ;

2. Seam or base was wet;

3. Water cement ratio is not good, extrusion dense enough.

the solution:

1) used in the open time;

(2) base and seam can not be too wet;

3. Allocate appropriate water-cement ratio, strict construction according to the requirement;

(4) using the jointing tool to fill the seam pressure, joint sealant used to.

Over the years, has become very popular as more and more people are trying it out.

Kastar Adhesive Co.,Ltd. assures you that you will be satisfied with its results and humbly request you to try this. We are hoping for a better business deal with you.

The best grout sealer tile grout is an all-servo system capable of storing hundreds of grout waterproofing sealer process parameters to provide custom waterproof grout sealer profiles for each floor grout sealer type and bathroom grout sealer configuration.

The development of best grout sealer for porcelain tile tile grout products has massive potential for expansion.

Getting tile grout from an idea to production is a complex process. It involves significant research, time, planning and patience. But with the right information, the right resources and the right product, it's possible.