Traditional beauty joint agent VS epoxy crystal sand, who is better? -Beautiful seam agent factory

With the continuous improvement of people’s quality of life, there is also a certain pursuit of quality of life. Although the beauty seam agent has been sought after by many owners for its environmental protection, beauty and safety since its inception, but with time Over time, the shortcomings of traditional beauty joint agents have gradually been exposed, especially in the aspect of construction. Construction of traditional beautifying agent a. Use traditional beautifying agent to keep the gap dry and free of moisture before construction, otherwise the construction effect will be greatly reduced. b. The traditional beautifying agent needs to be glued and pressed during construction, and the remaining material can be shoveled after curing, which is time-consuming and laborious. c. Most of the beauty joints on the market are very troublesome to construct. The two sides of the tiles must be covered with textured paper, which is easy to contaminate the tiles, stick to the hands, and the clothes are difficult to clean, and they are brittle and easy to fold. d. The traditional beautifying agent is only a shiny surface, which does not match the style of many tiles nowadays. e. The traditional beautifying agent is only suitable for general ceramic tiles, and the beautifying joints of this type like mosaic will take a lot of effort, and the effect is not satisfactory. In order to solve the owner's problem, the Meisew factory has been upgraded to the seventh generation of Meisew new material epoxy crystal sand. The water-based epoxy crystal sand joint filler has gradually become known and familiar to the people in the industry. Its application in the joint filling of special high-end brick materials such as antique bricks and mosaics has achieved very good results. Its construction is also extremely simple, and it is very popular. The more decoration owners love it, it has gradually become synonymous with high-end beauty sewing. The following is a detailed introduction to the epoxy crystal sand of the beauty joint agent factory: Epoxy crystal sand is a multi-component pre-mixed water-based beauty joint agent, zero solvent, low VCO, soluble in water, The product contains colored quartz sand, which has a frosted texture after solidification, the color is firm and does not fade, the decoration is strong, and the practicability is higher than that of the traditional beautifying agent, which can completely solve the unsightly and dirty blackness of the tile beautifying joint. Epoxy crystal sand composition Epoxy crystal sand is a two-component anti-acid, anti-alkali, sterilizing epoxy resin grout. It is a water-based product, solvent-free, environmentally friendly and pollution-free. Epoxy crystal sand is suitable for all kinds of ceramic tiles, antique bricks, wood grain bricks, cement bricks, cultural bricks, soft light bricks, mosaics, pebbles and other stone filling decorations. It is suitable for those places with extremely high hygiene requirements, such as bathrooms. , Kitchen, sun room, balcony, swimming pool, flower bed and other locations. Not only that, in terms of construction, the epoxy crystal sand of the beauty grout factory has its own unique advantages compared with traditional beauty grouts: a. The epoxy crystal sand can be used in the wet environment of the gap without affecting the construction effect. . b. Epoxy crystal sand is water-soluble and soluble in water. If it accidentally sticks to the skin or clothing during construction, it can be rinsed with water before curing. c. The construction of epoxy crystal sand is basically similar to the joint sealant, which can be completed at one time without waiting for curing, and it takes a short time. d. Epoxy crystal sand is a matte matte surface, which is higher-grade than traditional beautifying agents. f. For ceramic tiles such as mosaics, epoxy crystal sand only needs one scratch and one rub, and it can be easily done. At the end of the article, I will give you the six advantages of the epoxy crystal sand of the beauty joint factory! , Strong and wear-resistant due to its own production material, epoxy crystal sand has high hardness and strength, and can resist heavy pressure and wear. , Safe and non-toxic, it is a real water-based material, green and environmentally friendly, and will not release any gas harmful to human health. , Convenient construction, convenient construction, after full mixing, the material can be filled into the gap with a scraper, and the remaining material can be removed by washing, and it can be solidified in a water environment without affecting the color brightness and use. Residual materials use a wet towel Wipe gently along the edges. , Durable and non-fading crystal sand has a strong texture, soft color and selected mineral materials, durable and non-fading. , Eliminate potential safety hazards, have the effects of waterproof, non-slip, stain-resistant and corrosion-resistant. , Maintenance is simple. The subsequent maintenance is simple and the surface is dense. You can wipe it gently with a towel to achieve a bright as new effect.
Epoxy Crystal Sand Traditional Beauty Seam Agent