True porcelain construction process analysis

True porcelain construction process analytical 1 clear if ceramic tile is a new laid, brick joints have been carried out for caulking, and you may need to use the crack-cleaning tool will be cleared of ceramic tile aperture 3 ~ 5 mm deep, if not for caulking ceramic tile, can be true porcelain construction directly. 2 cleaning in true porcelain before construction, should first will clean up the dust with a vacuum cleaner in the ceramic tile aperture, on both sides of ceramic tile aperture with a towel clean, remove all dust, grease and other pollutants, at the same time with crack-cleaning shovel knife to remove contaminants on the surface of the ceramic tile. After 3 wax in aperture is clean, if ceramic tile is light, don't need to wax, can be directly the construction, if it is archaize brick or pits brick, you will need to wax before playing. Above is today bring you share, the tips, you get here? This article copyright WWW. zhuogao。 All net, do not reprint copy and paste, offenders