Tutorial on construction method of special adhesive for large slab tiles-beautiful joint agent factory

The strong tile adhesive of Meijiao Factory is specially designed for large-slab tiles, which can effectively improve the effect of tile paving with low water absorption, and reduce the phenomenon of hollowing and falling tiles. Product introduction: Due to the large overall area of u200bu200blarge slab tiles, the shrinkage ratio of mortar and ceramic tiles is different. The special adhesive for large slabs must increase its flexibility and reduce its rigidity in order to meet the requirements of paving. In order to meet the requirements of paving materials, the back glue is added with a special powder, which can produce a chemical reaction with the polymer in the back glue (the reaction is slow and will accompany the mortar for a lifetime) to produce a new flexible gel. It has very strong hydrophobicity, so the special adhesive for large slabs has good water resistance and can meet the requirements of large slab tile paving materials. Product characteristics: It can produce polymerization reaction with mortar, has super adhesion, good weather resistance, thermal expansion coefficient close to that of concrete, and it is difficult to separate from the base of the building; good water resistance, with the supplement of a suitable amount of water, The activity of the material is stimulated; the use of the barrel is ready to use, that is, scratch and paste, no need to wait, no change in construction habits, water-based materials, formaldehyde-free, environmentally friendly and non-toxic; with cement mortar paving, the construction cost is much lower than high-performance ceramic tiles Glue and other paving materials are cost-effective. Scope of application: It is used for the interface treatment of high-grade ceramic tiles such as porcelain tiles, low water absorption vitrified tiles, full-body tiles, full polished glaze, microcrystalline stones, antique tiles, etc. , Used for interface enhancement of new and old concrete surfaces, building reinforcement and other fields. , Pretreatment of special base surfaces such as flue, waterproof layer, wood, glass, etc. , Large slab tiles, marble wet paste. Construction tools: gloves, barrel opener, rubber hammer, scraper, etc. Construction steps: 1. Clean the back of the tiles. 2. Use a bucket opener to open the bucket and take out all the items in the bucket, including scrapers and paste tile adhesives. 3. Tear open the adhesive packaging bag, squeeze out a proper amount of adhesive on the back of the tiles, and use a scraper to apply evenly. The area must be more than %, and the edge of the tiles should be 1 cm away to avoid touching the sides and front of the tiles. The special paste adhesive for large slab tiles in the Meijiao factory does not need to be dried, and you can immediately apply cement mortar to the wall. After installing the wall, tap the tiles with a rubber hammer to make the tiles better bond with the wall. The strong ceramic tile adhesive of the Meijiao factory is underwritten by PICC Pu0026C Insurance to ensure that the tiles will never fall off. The strong ceramic tile adhesive of Meijiao Factory is suitable for laying ceramic tiles in living rooms, villas, exterior walls of buildings, building halls, shopping malls and other places. It is environmentally friendly, safe and reliable.
Tile Back Adhesive Beauty Grout Factory Construction Method Large Slab Tile