Use standard epoxy grout

Using standard epoxy grout is what? When using laying thickness should be? The underlying how when using combined with rubble? Beijing bilateral landscape engineering co. , LTD. To tell you about: 1, epoxy grout pavement thickness: from the known for colorful epoxy grout strength, mostly applied to the pavement, square, parking lot, garden road, village road etc. On the basis of the road is not the same as the surface layer thickness, on the sidewalk, bike lanes and other light load on the ground, general epoxy grout thickness not less than 8 ㎝; To the parking lot, square and so on the ground in the load on the ground, not less than 10 ㎝ epoxy grout thickness. 2, in order to ensure the structure layer is satisfied with the overall strength and water permeability, surface layer should be permeable layer and better water retention under the cushion. The underlying pleading, on the plain soil compaction layer, with the underlying material, shall have the right strength, must have good water permeability, choose grading grading sand or gravel, etc. When choosing graded crushed stone, gravel maximum particle size should be less than 0. Seven times the thickness of the bottom of society, and not beyond 50 mm. Cushion generally choose natural gravel, particle size of less than 10 mm, commonly known as melon seeds, and covered by 15 cm ~ 30 cm thick, uniform should be laid flat. Above is for information about the standard of epoxy grout, epoxy grout has many advantages than traditional land, rainy days to avoid surface water and road surface reflective at night, for example, forward of the vehicle and pedestrian traffic safety and comfortable sex, is a good choose.