Water construction appeared from, crack, why?

Water porcelain after construction, a period of time, part of the construction will appear fall off, cracks and other issues, why will appear this problem? The biggest difference between water porcelain and true porcelain, is the environmental protection and water soluble, and it is for this reason that cause water compared with true porcelain porcelain, the strong consistency of some lower its viscosity and materials. This leads to our construction method, compared with the original a few small changes. Today bring water in construction of porcelain to note a few points. 1, water cleanness porcelain surface cleanliness requirements of the construction process and is higher, because the surface tension of the water, sewage water porcelain causes shrinkage cavity, cause water porcelain are difficult to fit on the ceramic tile aperture. Of ceramic tile aperture as much as possible before the construction of clean and keep clean, make ceramic tile aperture is dry, excluding oil, dust, water, etc. , so that water porcelain and ceramic tile aperture to perfect fit. Can effectively prevent the loss. 2, water-soluble because water porcelain with water-soluble, relative to the true porcelain to dilute some, leading to a material, water pressure needed for the porcelain lower than true porcelain. We should pay attention to during the construction, good wanted to control intensity and frequency, let water porcelain material in ceramic tile aperture, bao hou uniform level consistent, such ability avoid water porcelain cracking problem effectively. Above is today bring you share, the tips, you get here? This article copyright WWW. zhuogao。 All. net, reprint please indicate the source, the offenders