[Waterproof coating] K11 nano waterproof slurry construction method-Mei Gap Factory

The K Nano Waterproof Slurry of Meijiao Factory is a two-component cement-based waterproof material. The blue coating film prevents leakage and ensures that the water does not leak. The tools required for construction are: spatula, ash knife, agitator, roller brush, brush, etc. 1. Base surface treatment Clean up loose materials on the base surface, and use cement mortar to repair larger holes and cracks. Use a broom or blower to clean the base surface, moisten the base surface with clean water to saturation, and use plugging products to reinforce the critical area. 2. Use steps Open the packaging barrel, take out all the materials, first pour all the liquid materials into the barrel, and then add the powder material into the barrel, fully stir for one minute to form a uniform slurry. Leave it to mature for a minute, and stir again for about a second before use. The standard painting height is about centimeters. Use a roller or brush to paint. It is recommended to apply one-time. The application of each layer must be carried out after the previous layer is dry. The brushing direction of the second layer should be perpendicular to the first layer to achieve the best coverage. The closed water test can be performed after the coating film is completely dry. 3. Close the water test. Block the floor drain hole with sandbags, pour water about one centimeter, close the water for an hour, and then check whether there is water seepage on the walls and lower ceiling of the temporary housing. The K nano waterproof sizing agent of Meiji Factory is suitable for kitchens, bathrooms, balconies, basements, swimming pools, water parks and other places, and it is truly drip-proof.

Waterproof Coatings Beauty grout Factory Construction K