Waterproof paint brush method and how to maintain? - - - - - - Ceramic tile adhesive | | | waterproof coating straight with mortar jointing agent

, mixing: add liquid into the container first, then add the powder slowly, fully mixing - at the same time Minutes to form azoic glutinous rice dough and particle uniform paste can be used; ( It is best to use a blender) , besmear brushs: directly with brush or roller coating on the base, using uniform, do not leak brush; Generally need to besmear brushs times ( According to the requirement) Every time, the thickness of the coating does not exceed the mm; Before a slightly dry solid after an besmear again after ( Just not glue the hand, the general interval - Hours) , before and after the vertical cross brushing, besmear brushs the total thickness is commonly - mm; If already cured coating, coating another layer with water wet first. Construction and maintenance: hours suggest with wet cloth cover coating or spray water spraying coating into nursing. , protection: please take before after construction completely dry solid prohibit trample, such as rain, sun, sharp injury protection. And inspection ( Closed water test) : bathroom, please after the waterproof layer of dry solid (in areas such as the pool Summer hours at least, at least in the winter hours) Filled with water hours to see if waterproof construction qualified. Lightweight wall to do drench water test. Waterproof coating usage: normally. - 。 Kg square meters; Actual usage by the purpose and use, surface roughness, and environmental factors such as decision.