What circumstance is not suitable for the seam, is there a need to do?

In decorating floor is one of the most attention by people, the joint can increase the aesthetic of the floor. Now the seam an agent from various kinds of caulking product stand out, be received the highest degree of a product on the market.

the seam as its name implies is to make some ceramic tile and ceramic tile gaps between achieve good effect. But in many cases it is not suitable for the seam, because often produces the opposite effect, below I will simple introduction of the situation for everybody:

construction environment too damp

the construction joints shall be carried out in a dry, clean environment, if slightly water can affect the curing of seam an agent. Ceramic tile aperture, damp need to crack drying, just stick the ceramic tile also need to wait until completely dry before construction. If you need construction environment is too wet to dry, this kind of situation will not be able to do the seam.

didn't clean ceramic tile aperture

no crack-cleaning directly as the seam, there are a lot of dust in the ceramic tile aperture, in order to ensure that have enough depth to do beauty, generally clean gap first, and then to the construction. Started to do the beautiful seam, if there is no clear aperture gap affects the effect of the seam of dust, so it is better to don't do it.

ceramic tile aperture is too small,

in general, shop sticks ceramic tile all need to have a certain gap. To late to do the ceramic tile seam, reserved aperture is also have certain requirements. Normal should be not less than 2 mm or so, such ability is advantageous to the later construction, the effect will be better. If you are using a seamless ceramic tile, need to do the sewing, be sure to set aside a certain gap.

appears at the bottom of the ceramic tile of empty drum phenomenon

some ceramic tile bottom with the cement slurry, this kind of material is easy to fall off, lead to ground empty drum ceramic tile, wall tile fall off. If you encounter this kind of situation never do beauty, in the case of ceramic tile is not stable do beautiful seam will affect beautiful seam an agent adhesion.

the seam an agent of the poor quality of the products

the seam must choose products with quality guarantee, if choose the cheap, poor quality products, do not do the seam. Inferior the seam an agent is not only the result is bad, and poisonous and harmful.

that is to introduce several kinds of beauty can't be a ceramic tile seam, hope to help friends in need.