What preparations need to be made before the application of the beauty joint? -Beautiful seam agent factory

Recently, many customers have inquired about what preparations need to be made before the application of the beauty joint agent. Now I will give you a brief introduction.



The first is to reserve the width and narrow distance of the design seam. The general width is about mm to .mm, and the depth standard is .mm to .mm. The specific design effect needs to reflect the three-dimensional decoration effect and be able to express In order to get a sense of hierarchy, errors need to be considered, including natural factors (such as thermal expansion and contraction), as well as human factors in use.



The second is the reserved design operation of brick joints. First, use a cross with a set width to design the brick joints, in which the sensory consistency of the width and the narrowness must be maintained, and then the low joints are filled with cement or caulking agent. It is compacted with willow, under normal circumstances the depth can reach .mm to .mm is the most suitable. This also reflects the need for personalized operation, because the differences in different space environments are very large.



Finally, it needs to be dried. If the relevant dryness and hardness requirements are not met, this can provide a guarantee for the operation of the subsequent beautification agent, and in the process, use a rag to remove the dust and impurities on the surface. In this way, it can ensure the seamless operation of the beauty seam agent in the process of use, which also objectively reflects the achievement of its effect, and it is also subject to the analysis of subjective factors.